Topcon ES-62 Instruction Manual page 128

6
Press the {F4} (ENTER) key.
The file will be set.
7
Press the {F1} (INPUT) key, and enter the new
point name. *4)
Press the {F4} (ENT) key.
8
Enter reflector height in the same way.
9
Collimate the new point, and press the {F1}
(MEAS) key.
Distance measuring starts.
10
Press the {F3} (YES) key.*5)
The name and coordinate value are stored into
COORD.DATA.
The input menu for next new point is displayed.
PT# is automatically incremented.
*1) If you want to input file name directly, press the {F1} (INPUT) key and enter a file name.
*2) When a file has been selected already, '*' mark is indicated on left of current file name.

For the file discrimination mark (*, @, &), refer to Chapter 9.3 "File Maintenance".
*3) Data in a file shown with arrow can be searched by pressing {F2} (SRCH) key.

*4) Refer to Section 2.4 "How to Enter Alphanumeric Characters".
*5) An error will be displayed when the internal memory is full.
{F4}
SIDE SHOT
INPUT SRCH ––– ENTER
{F1}
REFLECTOR HEIGHT
Enter PT#
INPUT
{F4}
R.HT
Enter R.HT
REFLECTOR HEIGHT
{F4}
INPUT
R.HT
MEAS
Collimate
{F1}
> Measuring...
>REC ?
{F3}
SIDE SHOT
INPUT SRCH ––– ENTER
8-13
8 LAYOUT
PT#:
= 0.000 m
--- --- [CLR] [ENT]
: 1.235 m
--- NP/P ---
HR: 123°40'20"
HD*[n] < m
VD:
< complete >
N : 1234.567 m
E : 123.456 m
Z : 1.234 m
[YES][NO]
PT#:NP-101
m