Prism System - Topcon DS Series Instruction Manual

26.PRISM SYSTEM

Arrangement according to your needs is possible.
Pole adaptor- A
• Use the above prisms after setting them at the same height as the instruments. To adjust the height
of prism set, change the position of fixing screws.
• Plug-3 is necessary for the tribrach adaptor-2, tribrach adaptor-S2 and pole adaptor-F2 to coincide
with the height of this series.
Tilting prism Tilting prism
holder-2 holder-3
with target
plate-2
Pole adaptor- F2
Fixed 3 prisms unit
Tilt single prism unit
360° Prism ATP1
Target pole-2
(not used with 9 prisms)
Prism-2
Triple prism
Single prism
holder-2 holder-2
Plug-3
Tribrach
adaptor-2
Optical plummet tribrach
Tribrach
Fixed 9 prisms unit
Tripod
360° Sliding Prism ATP1S
174
Tilting triple 9 prism
prism holder-1 holder-2
Tribrach
adaptor-S2