Selecting A Coordinate File For Data Collection - Topcon ES-62 Instruction Manual

7.1.2 Selecting a Coordinate File for Data Collection

When coordinate data in a coordinate data file are used for occupied point or backsight point, select a
coordinate file from the data collect menu 2/2 beforehand.
Operating procedure
1
Press the {F1} (SELECT A FILE) key from DATA
COLLECT menu 2/2.
2
Press the {F2} (COORD.DATA) key.
3
Select a coordinate file in the same manner as
Section 7.1.1 "Selecting a File for Data Collection".
Operation
DATA COLLECT
{F1}
SELECT A FILE
{F2}
INPUT LIST --- ENTER
7-4
7 DATA COLLECTION
Display
F1:SELECT A FILE
F2:PCODE INPUT
F3:CONFIG.
F1:MEAS.DATA
F2:COORD.DATA
SELECT A FILE
FN:
2/2
↓
P