Coordinate Data Direct Key Input; Coordinate Data Input - Topcon ES-62 Instruction Manual

9.4 Coordinate Data Direct Key Input

9.4.1 Coordinate data input

Coordinate data for the layout point or control point can be input directly from the keyboard. This data
can be stored into a file in the internal memory.
Operating procedure
1
Press the {F3} (MEMORY MGR.) key from the
menu 1/3.
2
Press the {F4} (P ) key.
↓
3
Press the {F1} (COORD. INPUT) key.
4
Press the {F1} (INPUT) key and enter File Name
you want to input.
Press the {F4} (ENT) key. *1)
5
Select the kind of coordinates.
NEZ: Coordinate data
PTL: The coordinate data for point to line
6
Press the {F1} (INPUT) key and enter PT#.
Press the {F4} (ENT) key. *1)
7
Enter data.
Press the {F4} (ENT) key. *1)
8
Enter PCODE and press the {F4} (ENTER).
Next input display is shown, point number (PT#) is
automatically incremented.

*1) Refer to Section 2.4 "How to Enter Alphanumeric Characters".
Operation
{F3}
MEMORY MGR.
{F4}
MEMORY MGR.
{F1}
SELECT A FILE
INPUT LIST ––– ENTER
{F1}
COORD. DATA INPUT
Enter FN
{F4}
{F1}
COORD. DATA INPUT
INPUT LIST ––– ENTER
{F1}
Enter PT#
{F4}
Enter data
{F4}
INPUT LIST ––– ENTER
{F1}
COORD. DATA INPUT
Enter PCODE
{F4}
INPUT –––
9-10
9 MEMORY MANAGER MODE
Display
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN
F1:COORD. INPUT
F2:DELETE COORD.
F3:PCODE INPUT
FN:_________
F1:NEZ
F2:PTL
PT#:_________
N= 100.234 m
E: 12.345 m
Z: 1.678 m
--- --- [CLR] [ENT]
COORD. DATA INPUT
PCODE:_________
PT#:TOPCON-102
––– ENTER
1/3
↓
P
2/3
P ↓