Go To Work; To Set Occupied Point And Backsight - Topcon ES-62 Instruction Manual

4
Select {F1} to {F3} to set the unit of distance.
{F1} (US FEET-10THE): Display in feet
{F2} (US FEET-INCHES): Display in feet and
inches
{F3} (METERS): Display in meters
5
Select {F1} to {F3} to set the display sequence of
coordinates.
{F1} (N,E,Z): Display N, E, Z
{F2} (E,N,Z): Display E, N, Z
{F3} (X,Y,Z): Display X, Y, Z
6
Select {F1} ~ {F3} to set the distance
measurement mode.
{F1} (FINE): FINE mode
{F2} (CRS-1mm): COARSE mode (Rounding in
the unit of 1mm)
{F3} (CRS-10mm): COARSE mode (Rounding in
the unit of 10mm)
7
Press {F1} (OK) to set.

19.4 GO TO WORK

The following operations are performed with GO TO WORK.
1) Setting of occupied point and backsight
2) Layout
3) Ordinary measuring and coordinate saving
1.JOB [JOB1
2.SETTING
3.GO TO WORK
[1]

19.4.1To Set Occupied Point and Backsight

To set occupied point
 Selecting from existing coordinate data
Operating procedure
1
Select {F1} (INST SETUP).
]
{F3}
[2] [3] ↓
19-4
Select
1.N,E,Z
{F1} ~ {F3}
2.E,N,Z
3.X,Y,Z
[1]
Select
1.FINE
{F1} ~ {F3}
2.CRS-1mm
3.CRS-10mm
[1]
Select
DIST UNITS
{F1} ~ {F3}
COORDINATES :NEZ
EDM MODE
OK
{F1}
1.JOB [
2.SETTING
3.GO TO WORK
[1]
••••••INST SETUP
••••••LAYOUT
••••••TOPO
1.INST SETUP
2.LAYOUT
3.TOPO
[1] [2] [3]
Operation
1.INST SETUP
2.LAYOUT
3.TOPO
[1]
{F1}
1.SELECT INST PT
2.CREATE INST PT
3.MEAS KNWN PTS
[1]
19 TOP FIELD MODE
[2] [3]
[2] [3]
:METERS
:CRS-10
EDIT
]
[2] [3] ↓
Display
[2] [3]
[2] [3]