Topcon ES-62 Instruction Manual page 181

2
Select {F1} (SELECT INST PT).
3
Select an existing coordinate point with {F1} or
{F2} (Arrow) key, or directly enter a coordinate
point.
4
Set with {ENT} key.
5
Enter an instrument height.
6
Set with {ENT} key.
 Then, the procedure will move onto backsight
setting.
 Setting by entering the coordinate data of a occupied point directly
Operating procedure
1
Select {F1} (INST SETUP).
2
Select {F2} (CREATE INST PT).
3
Enter the coordinate point of a occupied point and
its description.
4
Set with {ENT} key.
{F1}
ENTER INST PT
PT#:
Enter/
ENTER INST PT
Select PT#
PT#:
{ENT}
ENTER INST HT
INST HT
Enter
ENTER INST HT
instrument
INST HT
height
{ENT}
1.SELECT BS PT
2.CREATE BS PT
3.BS DIRECTION
Operation
1.INST SETUP
2.LAYOUT
3.TOPO
{F1}
1.SELECT INST PT
2.CREATE INST PT
3.MEAS KNWN PTS
{F2}
ENTER NEW POINT:
PT#:
DESC:
Enter PT#,
ENTER NEW POINT:
Enter
PT#:
DESC
DESC:
{ENT}
19-5
19 TOP FIELD MODE
[
↑ ↓
ALP CLR
[OCC-PT
↑ ↓
ALP CLR
=0.000_
=1.500_
[1] [2] [3]
Display
[1] [2] [3]
[1] [2] [3]
[_
[
ALP
[OCC
[POINT_
ALP
N [
E [
Z [
ALP
]
]
m
CLR
m
CLR
]
]
CLR
]
]
CLR
]
]
]
CLR