File Maintenance - Topcon ES-62 Instruction Manual

9.3 File Maintenance

In this mode, the following items are available.
Renaming file name / Searching data in a file / Deleting files
 FILE MAINTAN. menu
Pressing {F3} (FILE MAINTAN.) key from MEMORY MANAGER menu 1/3, file list will be shown.
• File discrimination mark (*,@,&)
File discrimination mark (*,@,&) placed before file name indicates the file status.
For measured data file
" * " selected file for DATA COLLECT mode.
For coordinate data file
" * " selected file for LAYOUT mode.
" @ " selected coordinate file for DATA COLLECT mode.
" & " selected coordinate file for both LAYOUT and DATA COLLECT mode.
• Data discrimination character (M, C)
Data discrimination character (M, C) placed before four figures indicates the type of data.
" M " : Measured data
" C " : Coordinate data.
• Four figures means the total number of data in the file.
(Coordinate data file has an extra data for working.)
Press the { } or {
MEMORY MGR.
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN. P
{F3}
@AMIDAT
→ ∗MEASD1
&COORD1
REN SRCH
Renaming file name
} key to scroll to next file.
9-7
9 MEMORY MANAGER MODE
1/3
↓
{ESC}
/C0123
/M0123
/C0056
DEL –––
Deleting file
Searching data in a file