Initialization - Topcon ES-62 Instruction Manual

9.8 Initialization

This mode is used to initialize the internal memory.
Following data can be initialized.
FILE DATA : All files of measuring data and coordinate data
PCODE DATA : PCODE LIST
ALL DATA : FILE DATA and PCODE DATA

• The following data are not initialized even if initialization is executed.
: Coordinates of the instrument, Instrument height and Reflector height.
Example Initialization: ALL DATA (FILE data and PCODE data)
Operating procedure
1
Press the {F3} (MEMORY MGR.) key from the
menu 1/3.
2
Press the {F4} (P ) key twice.
↓
3
Press the {F2} (INITIALIZE) key.
4
Select the data to initialize by pressing one of the
{F1} to {F3} key.
Example: {F3} (ALL DATA)
5
Confirm the erase data, press the {F4} (YES) key.
Initializing will start.
The display returns to menu.
Operation
{F3}
MEMORY MGR.
{F4}
MEMORY MGR.
{F4}
{F2}
INITIALIZE
{F3}
INITIALIZE DATA
>OK ?
{F4}
INITIALIZE DATA
MEMORY MGR.
9-19
9 MEMORY MANAGER MODE
Display
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN. P
F1:DATA TRANSFER
F2:INITIALIZE
F1:FILE AREA
F2:PCODE LIST
F3:ALL DATA
ERASE ALL DATA !
[NO][YES]
<Initializing!>
F1:DATA TRANSFER
F2:INITIALIZE
1/3
↓
3/3
P ↓
3/3
↓
P