Topcon ES-62 Instruction Manual page 123

 Example setting: Setting the backsight point coordinates directly
Operating procedure
1
Press the {F2} (BACKSIGHT) key from the Layout
menu 1/2.
The previous data is shown.
2
Press the {F3} (NE/AZ) key.
3
Press the {F1} (INPUT) key and enter coordinate
value.
Press the {F4} (ENT) key. *1), 2)
4
Sight the backsight point.
5
Press the {F3} (YES) key.
The display returns to the layout menu 1/2.

*1) Refer to Section 2.4 "How to Enter Alphanumeric Characters".
*2) It is possible to record the coordinate value.
Operation
{F2}
{F3}
{F1}
Enter coord.
{F4}
Sight BK
{F3}

Refer to Chapter 17 "SELECTING MODE".
8-8
Display
BACKSIGHT
PT#:
INPUT LIST NE/AZ ENT
N→
E:
INPUT ––– AZ
BACKSIGHT
H(B)= 0°00'00"
>Sight ? [YES][NO]
LAYOUT
F1:OCC.PT INPUT
F2:BACKSIGHT
F3:LAYOUT
8 LAYOUT
m
m
ENTER
1/2
P ↓