Ptl (Point To Line) Data Input - Topcon ES-62 Instruction Manual

9.4.2 PTL (Point to Line) data input

PTL Coordinate data for the layout point or control point can be input directly from the keyboard. This
data can be stored into a file in the internal memory.
Operating procedure
1
Press the {F3} (MEMORY MGR.) key from the
menu 1/3.
2
Press the {F4} (P ) key.
↓
3
Press the {F1} (COORD. INPUT) key.
4
Press the {F1} (INPUT) key and enter File Name
you want to input.
Press the {F4} (ENT) key. *1)
5
Select the kind of coordinates.
NEZ: Coordinate data
PTL: The coordinate data for point to line
6
Press the {F1} (INPUT) key and enter PT#.
Press the {F4} (ENT) key. *1)
7
Enter data.
Press the {F4} (ENT) key. *1)
L: Line
O: Offset
E: Elevation
Enter PCODE, FROM and TO data and press the
{F4} (ENTER).*2)
Next input display is shown, point number (PT#) is
automatically incremented.

*1) Refer to Section 2.4 "How to Enter Alphanumeric Characters".
*2) When the inputted point name data as FROM or TO, does not exist in the same file, an error will be
displayed.
Operation
{F3}
MEMORY MGR.
{F4}
MEMORY MGR.
{F1}
SELECT A FILE
INPUT LIST ––– ENTER
{F1}
COORD. DATA INPUT
Enter FN
{F4}
{F2}
COORD. DATA INPUT
INPUT LIST ––– ENTER
{F1}
Enter PT#
{F4}
Enter data
{F4}
INPUT LIST ––– ENTER
{F1}
COORD. DATA INPUT
Enter PCODE
{F4}
INPUT –––
9-11
9 MEMORY MANAGER MODE
Display
F1:FILE STATUS
F2:SEARCH
F3:FILE MAINTAN
F1:COORD. INPUT
F2:DELETE COORD.
F3:PCODE INPUT
FN:_________
F1:NEZ
F2:PTL
PT#:_________
L= m
O: m
E: m
--- --- [CLR] [ENT]
PCODE→_________
FROM:
TO :
PT#:TOPCON-102
––– ENTER
1/3
↓
P
2/3
↓
P