Point To Line Measurement; To Change To The Point To Line Measurement - Topcon ES-62 Instruction Manual

7.5 Point to Line Measurement

In this mode, a offsetting point from a certain determined line can be measured.
N
OCC.PT

7.5.1 To change to the point to line measurement

Operating procedure
1
Press the {F3} (MEAS) key and press the {F4}key
to get to the next soft key page.
2
Press the {F2} (PTL) key.
3
Press the {F1} (ON) key and press the {F4}
(ENTER) key.
The input screen of a reference point 1 will appear.
4
Enter the point 1 data and press the {F4} (Enter).
The input screen of a reference point 2 will appear.
5
Enter the point 2 data and press the {F4} (Enter).
The screen will return to data collect
measurement.
If the PTL measurement mode is available, 'PTL'
will appear next to PT#.
Ref.P1
Offset
Ref.P2
ΔO
PT#
(PT#PTL)
ΔL
Operation
PT#
PCODE :TOPCON
R.HT
INPUT SRCH MEAS ALL
{F3}
PT#
{F4}
PCODE :TOPCON
R.HT
VH
OFSET
{F2}
POINT TO LINE MODE
[F1:ON
{F4}
REF. POINT 1
INPUT LIST --- ENTER
Input data
REF. POINT 2
{F4}
INPUT LIST --- ENTER
Input data
PT#PTL→ PT-01
{F4}
PCODE :TOPCON
R.HT
INPUT SRCH MEAS ALL
7-18
7 DATA COLLECTION
Line
E
Display
→PT-01
: 1.500 m
→PT-01
: 1.500 m
*SD NEZ
PTL NP/P P2
]
F2:OFF
ENTER
PT#:
PT#:
: 1.500 m
↓
P1
↓