Repetition Angle Measurement - Topcon ES-62 Instruction Manual

3.5 Repetition Angle Measurement


• Repetition angle measurement can be done by horizontal angle right measurement mode.
Make sure the mode is Horizontal Angle Right measurement.
Operating procedure
1
Press the {F4} ( ) key to get the function on page
↓
2.
2
Press the {F2} (REP)key.
3
Press the {F3} (YES) key.
4
Collimate the target A and press the {F1} (0SET)
key.
5
Press the {F3} (YES) key.
6
Collimate the target B using the horizontal clamp
and tangent screw.
Press the {F4} (HOLD) key.
7
Recollimate target A using the horizontal clamp
and tangent screw, and press the {F3} (REL)key.
8
Recollimate target B using the horizontal clamp
and tangent screw, and press the {F4} (HOLD)
key.
9
Repeat 7 to 8 to measure the desired number of
repetitions.
Operation
{F4}
0SET HOLD HSET
TILT
{F2}
REPETITION ANGLE
---
{F3}
REP-ANGLE
0SET
Collimate A
REPETITION ANGLE
{F1}
INITIALIZE
---
{F3}
REP-ANGLE
0SET
Collimate B
REP-ANGLE
{F4}
0SET
Collimate A
REP-ANGLE
{F3}
0SET
Collimate B
REP-ANGLE
{F4}
0SET
REP-ANGLE
0SET
3-4
3 ANGLE MEASUREMENT
Display
V : 90°10'20"
HR: 170°30'20"
REP V%
>OK?
--- [YES][NO]
COUNT[ 0]
Ht: 0°00'00"
Hm:
V/H REL HOLD
>OK?
--- [YES][NO]
COUNT[ 0]
Ht: 0°00'00"
Hm:
V/H REL HOLD
COUNT[ 1]
Ht: 45°10'00"
Hm: 45°10'00"
V/H REL HOLD
COUNT[ 1]
Ht: 45°10'00"
Hm: 45°10'00"
V/H REL HOLD
COUNT[ 2]
Ht: 90°20'00"
Hm: 45°10'00"
V/H REL HOLD
COUNT[ 4]
Ht: 180°40'00"
Hm: 45°10'00"
V/H REL HOLD
[Example] 4 measurement
↓
P1
↓
P2