Operational Procedure Of Data Collect - Topcon ES-62 Instruction Manual

7.2 Operational Procedure of DATA COLLECT

Operating procedure
1
Press the {F3} (FS/SS) key from the data collect
menu 1/2.
The previous data is shown.
2
Press the {F1} (INPUT) key and enter PT#.
Press the {F4} (ENT) key. *1)
3
Enter PCODE, R.HT in the same way. *2),3)
4
Press the {F3} (MEAS) key.
5
Collimate the target point.
6
Press one of the {F1} to {F3} key. *4)
Example: {F2} (SD) key.
Measuring starts.
The measuring data is memorized and the display
changes to the next point. *5)
PT# is automatically incremented.
7
Enter the next point data and collimate the next
point.
8
Press {F4} (ALL) key.
Measuring starts in the same measuring mode of
the previous point.
Data is recorded.
Continue the measuring in the same way.
To finish the mode, press {ESC} key.
Operation
DATA COLLECT
{F3}
PT#
PCODE :
R.HT
INPUT SRCH MEAS ALL
{F1}
PT#
Enter PT#
PCODE :
{F4}
R.HT
[ALP][SPC][CLR][ENT]
PT#
PCODE →
R.HT
INPUT SRCH MEAS ALL
{F1}
PT#
Enter
PCODE :TOPCON
PCODE
R.HT
{F4}
INPUT SRCH MEAS ALL
{F1}
VH
EnterR.HT
{F4}
{F3}
Collimate
{F2}
> Measuring...
PT#
PCODE :TOPCON
R.HT
INPUT SRCH MEAS ALL
Collimate
{F4}
> Measuring...
PT#
PCODE :TOPCON
R.HT
INPUT SRCH MEAS ALL
7-7
7 DATA COLLECTION
Display
F1:OCC.PT# INPUT
F2:BACKSIGHT
F3:FS/SS
→
: 0.000 m
=PT-01
: 0.000 m
:PT-01
: 0.000 m
→ PT-01
: 1.200 m
*SD NEZ
V : 90°10'20"
HR: 120°30'40"
SD*[n] < m
< complete >
→ PT-02
: 1.200 m
V : 90°10'20"
HR: 120°30'40"
SD*[n] < m
< complete >
→ PT-03
: 1.200 m
1/2
↓
P
↓
P1