D-Link xStack DES-3800 Series Cli Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Switch
  5. xStack DES-3800 Series
  6. Cli manual
D-Link xStack DES-3800 Series Cli Manual

D-Link xStack DES-3800 Series Cli Manual

Layer 3 stackable fast ethernet managed switch
Hide thumbs Also See for xStack DES-3800 Series:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
CLI Manual
DES-3800 Series
Product Model:
Layer 3 Stackable Fast Ethernet Managed Switch
Release 1
©Copyright 2005. All rights reserved.

Advertisement

Table of Contents
loading

Related Manuals for D-Link xStack DES-3800 Series

Summary of Contents for D-Link xStack DES-3800 Series

  • Page 1 CLI Manual DES-3800 Series Product Model: Layer 3 Stackable Fast Ethernet Managed Switch Release 1 ©Copyright 2005. All rights reserved.
  • Page 2 August 2005 651ES3828015G RECYCLABLE...

  • Page 3: Table Of Contents

    Table of Contents INTRODUCTION ... 1 USING THE CONSOLE CLI ... 4 COMMAND SYNTAX ... 9 BASIC SWITCH COMMANDS ... 12 SWITCH PORT COMMANDS ... 23 PORT SECURITY COMMANDS ... 26 NETWORK MANAGEMENT (SNMP) COMMANDS ... 29 SWITCH UTILITY COMMANDS... 52 NETWORK MONITORING COMMANDS...
  • Page 4 DHCP RELAY... 143 802.1X COMMANDS ... 149 ACCESS CONTROL LIST (ACL) COMMANDS ... 160 CPU PROTECTION COMMANDS ... 183 TRAFFIC SEGMENTATION COMMANDS ... 185 TIME AND SNTP COMMANDS... 187 ARP COMMANDS ...193 VRRP COMMANDS... 197 ROUTING TABLE COMMANDS ... 204 ROUTE REDISTRIBUTION COMMANDS...
  • Page 5 D-LINK SINGLE IP MANAGEMENT COMMANDS... 298 COMMAND HISTORY LIST ... 309 POE ... 312 MODIFY BANNER AND PROMPT COMMANDS ... 317 TECHNICAL SPECIFICATIONS ... 320...

  • Page 6: Introduction

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Introduction The DES-3800 series is a member of the D-Link xStack switch family. xStack is a complete family of stackable devices that ranges from edge 10/100Mbps switches to core Gigabit switches. xStack provides...
  • Page 7 Information (Basic Settings) window on the Configuration menu. The IP address for the Switch must be set before it can be managed with the Web-based manager. The Switch IP address can be automatically set using BOOTP or DHCP protocols, in which case the actual address assigned to the Switch must be known.
  • Page 8 255.0.0.0. The system message Success indicates that the command was executed successfully. The Switch can now be configured and managed via Telnet, SNMP MIB browser and the CLI or via the Web- based management agent using the above IP address to connect to the Switch.

  • Page 9: Using The Console Cli

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Using the Console CLI The Switch supports a console management interface that allows the user to connect to the Switch’s management agent via a serial port and a terminal or a computer running a terminal emulation program.
  • Page 10 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual After the Switch reboots and you have logged in, the console looks like this: Figure 2- 1. Initial Console Screen after logging in Commands are entered at the command prompt, DES-3800:4#.
  • Page 11 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Figure 2- 3. Example Command Parameter Help In this case, the command config account was entered with the parameter <username>. The CLI will then prompt you to enter the <username> with the message, Next possible completions:. Every command in the CLI has this feature, and complex commands have several layers of parameter prompting.
  • Page 12 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual cursor control key was pressed to re-enter the previous command (config account) at the command prompt. Now the appropriate username can be entered and the config account command re-executed.
  • Page 13 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Figure 2- 6. Next possible completions: Show Command In the above example, all of the possible next parameters for the show command are displayed. At the next command prompt, the up arrow was used to re-enter the show command, followed by the account...

  • Page 14: Command Syntax

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command Syntax The following symbols are used to describe how command entries are made and values and arguments are specified in this manual. The online help contained in the CLI and available through the console interface uses the same syntax.
  • Page 15 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual {braces} Purpose Encloses an optional value or set of optional arguments. Syntax reset {[config | system]} Description In the above syntax example, you have the option to specify config or detail.
  • Page 16 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual displayed. Refreshes the pages currently displayed. Displays the remaining pages without pausing between pages. Enter Displays the next line or table entry.

  • Page 17: Basic Switch Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Basic Switch Commands The basic switch commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters create account [admin | user] <username 15>...
  • Page 18 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create account Example usage: To create an administrator-level user account with the username “dlink”. DES-3800:4#create account admin dlink Command: create account admin dlink Enter a case-sensitive new password:**** Enter the new password again for confirmation:**** Success.
  • Page 19 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show account Description Parameters Restrictions Example usage: To display the accounts that have been created: DES-3800:4#show account Command: show account Current Accounts: Username --------------- dlink Total Entries: 1...
  • Page 20 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show session Parameters Restrictions Example usage: To display the way that the users logged in: DES-3800:4#show session Command: show session ID Login Time ------------------------------ --------- *8 00000 days 00:00:37...
  • Page 21 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual IGMP Snooping TELNET RMON CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All show serial_port Purpose Syntax Description Parameters Restrictions Example usage: To display the serial port setting:...
  • Page 22 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config serial_port input for 10 minutes. 15_minutes − The console will log out the current user if there is no user input for 15 minutes. Restrictions Only administrator-level users can issue this command.
  • Page 23 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable clipaging Parameters Restrictions Example usage: To disable pausing of the screen display when show command output reaches the end of the page: enable telnet Purpose Syntax Description...
  • Page 24 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To disable the Telnet protocol on the Switch: DES-3800:4#disable telnet Command: disable telnet Success. DES-3800:4# enable web Purpose Syntax Description Parameters Restrictions Example usage: To enable HTTP and configure port number:...
  • Page 25 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command: disable web Success. DES-3800:4# save Purpose Syntax Description Parameters Restrictions Example usage: To save the Switch’s current configuration to non-volatile RAM: DES-3800:4#save Command: save Saving all configurations to NV-RAM... Done.
  • Page 26 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual reset Purpose Syntax Description Parameters Restrictions Example usage: To restore all of the Switch’s parameters to their default values: DES-3800:4#reset config Command: reset config Are you sure to proceed with system reset?(y/n) Success.
  • Page 27 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual logout Purpose Syntax Description Parameters Restrictions Example usage: To terminate the current user’s console session: DES-3800:4#logout Used to log out a user from the Switch’s console. logout This command terminates the current user’s session on the Switch’s console.

  • Page 28: Switch Port Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Switch Port Commands The switch port commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command Parameters config ports [<portlist | all>...
  • Page 29 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Success. DES-3800:4# show ports Purpose Syntax Description Parameters Restrictions Example usage: To display the configuration of all ports on a standalone switch: DES-3800:4#show ports Command show ports: Port...
  • Page 30 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To display the configuration of all ports on a standalone switch, with description: DES-3800:4#show ports description Command: show ports description Port Port State ------ -------- Enabled Auto/Disabled...

  • Page 31: Port Security Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Port Security Commands The Switch’s port security commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config port_security...
  • Page 32 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#config port_security ports 1-5 admin_state enable max_learning_addr 5 lock_address_mode DeleteOnReset Command: config port_security ports 1-5 admin_state enable max_learning_addr 5 lock_address_mode DeleteOnReset Success. DES-3800:4# delete port_security_entry Purpose Syntax Description...
  • Page 33 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To clear a port security entry by port: DES-3800:4# clear port_security_entry port 6 Command: clear port_security_entry port 6 Success. DES-3800:4# show port_security Purpose Syntax Description Parameters Restrictions Example usage:...

  • Page 34: Network Management (Snmp) Commands

    The network management commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. The DES-3800 Series supports the Simple Network Management Protocol (SNMP) versions 1, 2c, and 3. After enabling SNMP, you can specify which version of SNMP you want to use to monitor and control the Switch.
  • Page 35 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command create snmp user delete snmp user show snmp user create snmp view delete snmp view show snmp view create snmp community delete snmp community show snmp community...

  • Page 36: Command Parameters

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command disable snmp Each command is listed, in detail, in the following sections. create snmp user Purpose Syntax Description Parameters Parameters Used to create a new SNMP user and adds the user to an SNMP group that is also created by this command.
  • Page 37 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create snmp user Restrictions Example usage: To create an SNMP user on the Switch: DES-3800:4#create snmp user dlink default encrypted by_password auth md5 canadian priv none Command: create snmp user dlink default encrypted by_password auth md5 canadian priv none Success.
  • Page 38 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To delete a previously entered SNMP user on the Switch: DES-3800:4#delete snmp user dlink Command: delete snmp user dlink Success. DES-3800:4# show snmp user Purpose Syntax Description Parameters...
  • Page 39 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create snmp view Restrictions Example usage: To create an SNMP view: DES-3800:4#create snmp view dlinkview 1.3.6 view_type included Command: create snmp view dlinkview 1.3.6 view_type included Success. DES-3800:4#...
  • Page 40 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show snmp view Purpose Syntax Description Parameters Restrictions Example usage: To display SNMP view configuration: DES-3800:4#show snmp view Command: show snmp view Vacm View Table Settings View Name...
  • Page 41 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create snmp community Parameters <community_string 32> − An alphanumeric string of up to 32 characters that is used to identify members of an SNMP community. This string is used like a password to give remote SNMP managers access to MIB objects in the Switch’s SNMP agent.
  • Page 42 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show snmp community Purpose Syntax Description Parameters Restrictions Example usage: To display the currently entered SNMP community strings: DES-3800:4#show snmp community Command: show snmp community SNMP Community Table...
  • Page 43 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#config snmp 0035636666 Command: config snmp engineID 0035636666 Success. DES-3800:4# show snmp engineID Purpose Syntax Description Parameters Restrictions Example usage: To display the current name of the SNMP engine on the Switch:...
  • Page 44 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create snmp group Restrictions Example usage: To create an SNMP group named “sg1:” DES-3800:4#create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view v1 Command: create snmp group sg1 v3 noauth_nopriv read_view v1 write_view v1 notify_view v1 Success.
  • Page 45 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual delete snmp group Purpose Syntax Description Parameters Restrictions Example usage: To delete the SNMP group named “sg1”. DES-3800:4#delete snmp group sg1 Command: delete snmp group sg1 Success. DES-3800:4#...
  • Page 46 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Group Name : Group4 ReadView Name : ReadView WriteView Name : WriteView Notify View Name : NotifyView Security Model : SNMPv3 Security Level : authNoPriv Group Name : Group5...
  • Page 47 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Group Name ReadView Name WriteView Name Notify View Name Security Model Security Level Group Name ReadView Name WriteView Name Notify View Name Security Model Security Level Total Entries: 10...
  • Page 48 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create snmp host Purpose Used to create a recipient of SNMP traps generated by the Switch’s SNMP agent. Syntax create snmp host <ipaddr> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv] <auth_string 32>]...
  • Page 49 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual delete snmp host Parameters Restrictions Example usage: To delete an SNMP host entry: DES-3800:4#delete snmp host 10.48.74.100 Command: delete snmp host 10.48.74.100 Success. DES-3800:4# show snmp host Purpose...
  • Page 50 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create trusted_host Purpose Syntax Description Parameters Restrictions Example usage: To create the trusted host: DES-3800:4#create trusted_host 10.48.74.121 Command: create trusted_host 10.48.74.121 Success. DES-3800:4# show trusted_host Purpose Syntax Description...
  • Page 51 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# delete trusted_host Purpose Syntax Description Parameters Restrictions Example Usage: To delete a trusted host with an IP address 10.48.74.121: DES-3800:4#delete trusted_host 10.48.74.121 Command: delete trusted_host 10.48.74.121 Success.
  • Page 52 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable snmp authenticate traps Description This command is used to enable SNMP authentication trap support on the Switch. Parameters None. Restrictions Only administrator-level users can issue this command.
  • Page 53 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example Usage: To prevent SNMP traps from being sent from the Switch: DES-3800:4#disable snmp traps Command: disable snmp traps Success. DES-3800:4# disable snmp authenticate traps Purpose Syntax Description...
  • Page 54 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Success. DES-3800:4# config snmp system_location Purpose Syntax Description Parameters Restrictions Example usage: To configure the Switch location for “ DES-3800:4#config snmp system_location HQ 5F Command: config snmp system_location HQ 5F Success.
  • Page 55 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable rmon Purpose Syntax Description Parameters Restrictions Example Usage: To enable RMON: DES-3800:4#enable rmon Command: enable rmon Success. DES-3800:4# disable rmon Purpose Syntax Description Parameters Restrictions Example Usage:...
  • Page 56 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable snmp Parameters Restrictions Example Usage: To enable SNMP: DES-3800:4#enable snmp Command: enable snmp Success. DES-3800:4# disable SNMP Purpose Syntax Description Parameters Restrictions Example Usage: To disable SNMP:...

  • Page 57: Switch Utility Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Switch Utility Commands The download/upload commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command download config firmware image_id...
  • Page 58 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To download a configuration file: DES-3800:4#download configuration 10.48.74.121 c:\cfg\setting.txt Command: download configuration 10.48.74.121 c:\cfg\setting.txt Connecting to server... Done. Download configuration... Done. DES-3800:4# DES-3800:4##------------------------------------------------------------------- DES-3800:4## DES-3800:4## DES-3800:4## DES-3800:4## Copyright(C) 2000-2004 D-Link Corporation.
  • Page 59 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config firmware Purpose Syntax Description Parameters Restrictions Example usage: To configure firmware section 1 as a boot up section: DES-3800:4# config firmware section_id 1 boot_up Command: config firmware section_id 1 boot_up Success.
  • Page 60 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual '*' means boot up section (T) means firmware update thru TELNET (S) means firmware update thru SNMP (W) means firmware update thru WEB Free space: 3145728 bytes DES-3800:4#...
  • Page 61 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Copyright(C) 2000-2004 D-Link Corporation. All rights reserved. #------------------------------------------------------------------- # BASIC config serial_port baud_rate 9600 auto_logout 10_minutes enable telnet 23 enable web 80 # STORM config traffic control 1-5 broadcast disable multicast disable dlf...
  • Page 62 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#upload configuration 10.48.74.121 c:\cfg\log.txt Command: upload configuration 10.48.74.121 c:\cfg\log.txt Connecting to server... Done. Upload configuration...Done. DES-3800:4# enable autoconfig Purpose Used to activate the autoconfiguration function for the Switch. This will load a previously saved configuration file for current use.
  • Page 63 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual or TFTP server. This is exactly the same as using a download configuration command. After the entire Switch configuration is loaded, the Switch will automatically “logout” the server. The configuration settings will be saved automatically and become the active configuration.
  • Page 64 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable autoconfig Purpose Use this to deactivate autoconfiguration from DHCP. Syntax disable autoconfig Description This instructs the Switch not to accept autoconfiguration instruction from the DHCP server. This does not change the IP settings of the Switch. The ipif settings will continue as DHCP client until changed with the config ipif command.
  • Page 65 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual ping Parameters Restrictions Example usage: To ping the IP address 10.48.74.121 four times: DES-3800:4#ping 10.48.74.121 times 4 Command: ping 10.48.74.121 Reply from 10.48.74.121, time<10ms Reply from 10.48.74.121, time<10ms Reply from 10.48.74.121, time<10ms...

  • Page 66: Network Monitoring Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Network Monitoring Commands The network monitoring commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command show packet ports...
  • Page 67 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#show packet port 2 Port number : 2 Frame Size ------------ 65-127 128-255 256-511 512-1023 1024-1518 Unicast RX Multicast RX Broadcast RX CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh...
  • Page 68 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show utilization Purpose Syntax Description Parameters Restrictions Example usage: To display the port utilization statistics: DES-3800:4#show utilization ports Command: show utilization ports Port TX/sec RX/sec Util ------ ---------- ---------- ----...
  • Page 69 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command: show utilization cpu CPU utilization : -------------------------------------------------------------------------------------------- Five seconds - 15% DES-3800:4# clear counters Purpose Syntax Description Parameters Restrictions Example usage: To clear the counters: DES-3800:4#clear counters ports 2-9 Command: clear counters ports 2-9 Success.
  • Page 70 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show log Purpose Syntax Description Parameters Example usage: To display the switch history log: DES-3800:4#show log index 5 Command: show log index 5 Index Time ----- ------------------- 00000 days 00:01:09...
  • Page 71 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable syslog Purpose Syntax Description Parameters Restrictions Example usage: To disable the syslog function on the Switch: DES-3800:4#disable syslog Command: disable syslog Success. DES-3800:4# show syslog Purpose Syntax...
  • Page 72 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create syslog host host. <index 1-4> − Specifies that the command will be applied to an Parameters index of hosts. There are four available indexes, numbered 1 through 4.
  • Page 73 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create syslog host Restrictions Example usage: To create syslog host: DES-3800:4#create syslog host 1 ipaddress 10.1.1.1 state enable Command: create syslog host 1 ipaddress 10.1.1.1 state enable Success.
  • Page 74 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config syslog host Purpose Used to configure the syslog protocol to send system log data to a remote host. Syntax config syslog host [all | <index 1-4>] {severity [informational | warning | all] | facility [local0 | local1 | local2 | local3 | local4 | local5 | local6 | local7] | udp_port <udp_port_number>...
  • Page 75 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config syslog host local0 − Specifies that local use 0 messages will be sent to the remote host. This corresponds to number 16 from the list above. local1 − Specifies that local use 1 messages will be sent to the remote host. This corresponds to number 17 from the list above.
  • Page 76 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config syslog host Restrictions Only administrator-level users can issue this command. Example usage: To configure a syslog host: DES-3800:4#config syslog host 1 severity all facility local0 Command: config syslog host all severity all facility local0 Success.
  • Page 77 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show syslog host Purpose Syntax Description Parameters Restrictions Example usage: To show Syslog host information: DES-3800:4#show syslog host Command: show syslog host Syslog Global State: Disabled Host Id Host IP Address...
  • Page 78 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config system_severity sent to the Switch’s log for analysis. all – Entering this parameter will define which events occurring on the Switch will be sent • to a SNMP agent and the Switch’s log for analysis.

  • Page 79: Multiple Spanning Tree Protocol (Mstp) Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Multiple Spanning Tree Protocol (MSTP) Commands This Switch supports three versions of the Spanning Tree Protocol; 802.1d STP, 802.1w Rapid STP and 802.1s MSTP. Multiple Spanning Tree Protocol, or MSTP, is a standard defined by the IEEE community that allows multiple VLANs to be mapped to a single spanning tree instance, which will provide multiple pathways across the network.
  • Page 80 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command config stp instance _id delete stp instance_id config stp priority config stp mst_config_id config stp mst_ports show stp show stp ports show stp instance_id show stp mst_config id Each command is listed, in detail, in the following sections.
  • Page 81 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To disable STP on the Switch: DES-3800:4#disable stp Command: disable stp Success. DES-3800:4# config stp version Purpose Syntax Description Parameters Restrictions Example usage: To set the Switch globally for the Multiple Spanning Tree Protocol (MSTP):...
  • Page 82 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config stp Restrictions Example usage: To configure STP with maxage 18 and maxhops of 15: DES-3800:4#config stp maxage 18 maxhops 15 Command: config stp maxage 18 maxhops 15 Success.
  • Page 83 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config stp ports Parameters Restrictions Example usage: <portlist> − Specifies a range of ports to be configured. The beginning and end of the port list range are separated by a dash.
  • Page 84 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To configure STP with path cost 19, hellotime set to 5 seconds, migration enable, and state enable for ports 1-5 of module 1. DES-3800:4#config stp ports 1-5 externalCost 19 hellotime 5...
  • Page 85 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config stp instance_id Restrictions Example usage: To configure instance id 2 to add VID 10: DES-3800:4#config stp instance_id 2 add_vlan 10 Command : config stp instance_id 2 add_vlan 10 Success.
  • Page 86 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Success. DES-3800:4# config stp priority Purpose Syntax Description Parameters Restrictions Example usage: To set the priority value for instance_id 2 as 4096: DES-3800:4#config stp priority 4096 instance_id 2 Command : config stp priority 4096 instance_id 2 Success.
  • Page 87 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config stp mst_config_id Restrictions Example usage: To configure the MSTP region of the Switch with revision_level 10 and the name “Trinity”: DES-3800:4#config stp mst_config_id revision_level 10 name Trinity Command : config stp mst_config_id revision_level 10 name Trinity Success.
  • Page 88 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config stp mst_ports Restrictions Example usage: To designate ports 1 to 2 on, with instance ID 0, to have an auto internalCost and a priority of 0: DES-3800:4#config stp mst_ports 1-2 instance_id 0 internalCost...
  • Page 89 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual STP Status STP Version Max Age Hello Time Forward Delay Max Age TX Hold Count Forwarding BPDU DES-3800:4# Status 3 : STP enabled for MSTP DES-3800:4#show stp Command: show stp...
  • Page 90 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh show stp instance_id Purpose Syntax Description Parameters Restrictions Example usage: To display the STP instance configuration for instance 0 (the internal CIST) on the Switch:...
  • Page 91 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To show the MSTP configuration identification currently set on the Switch: DES-3800:4#show stp mst_config_id Command: show stp mst_config_id Current MST Configuration Identification ---------------------------------------- Configuration Name : [00:10:20:33:45:00...

  • Page 92: Forwarding Database Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Forwarding Database Commands The layer 2 forwarding database commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create fdb...
  • Page 93 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#create fdb default 00-00-00-00-01-02 port 5 Command: create fdb default 00-00-00-00-01-02 port 5 Success. DES-3800:4# create multicast_fdb Purpose Syntax Description Parameters Restrictions Example usage: To create multicast MAC forwarding:...
  • Page 94 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To add multicast MAC forwarding: DES-3800:4#config multicast_fdb default 01-00-00-00-00-01 add 1-5 Command: config multicast_fdb default 01-00-00-00-00-01 add 1-1-5 Success. DES-3800:4# config fdb aging_time Purpose Syntax Description...
  • Page 95 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual delete fdb Parameters Restrictions Example usage: To delete a permanent FDB entry: DES-3800:4#delete fdb default 00-00-00-00-01-02 Command: delete fdb default 00-00-00-00-01-02 Success. DES-3800:4# Example usage: To delete a multicast fdb entry:...
  • Page 96 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To clear all FDB dynamic entries: DES-3800:4#clear fdb all Command: clear fdb all Success. DES-3800:4# show multicast_fdb Purpose Syntax Description Parameters Restrictions Example usage: To display multicast MAC address table:...
  • Page 97 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show fdb Parameters Restrictions Example usage: To display unicast MAC address table: DES-3800:4#show fdb Command: show fdb Unicast MAC Address Aging Time = 300 VID VLAN Name ----...
  • Page 98 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show ipfdb Description Parameters Restrictions Example usage: To display unicast MAC address table: DES-3800:4#show ipfdb Command: show ipfdb Interface ------------ --------------- ------ --------- System System System System System...
  • Page 99 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config multicast port_filtering_mode Purpose Syntax Description Parameters Restrictions Example usage: To configure the multicast filtering mode to forward all groups on ports 1 through 4. DES-3800:4#config multicast port_filtering_mode 1-4...
  • Page 100 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups forward_unregistered_groups CTRL+C ESC q Quit SPACE n Next Page p Previous Page r Refresh...

  • Page 101: Broadcast Storm Control Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Broadcast Storm Control Commands The broadcast storm control commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config traffic control show traffic control Each command is listed, in detail, in the following sections.
  • Page 102 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show traffic control Purpose Syntax Description Parameters Restrictions Example usage: To display traffic control setting: Used to display current traffic control settings. show traffic control {group_list <storm_grouplist>} This command displays the current storm traffic control configuration on the Switch.
  • Page 103 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#show traffic control Command: show traffic control Traffic Control Threshold Unit Group [ports] (pps) ---- ------------- --------- 1 [ 1 ] 2 [ 2 ] 3 [ 3 ]...

  • Page 104: Qos Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual QoS Commands The DES-3800 Series supports 802.1p priority queuing. The Switch has 8 priority queues. These priority queues are numbered from 7 (Class 7) — the highest priority queue — to 0 (Class 0) — the lowest priority queue.
  • Page 105 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config bandwidth_control Purpose Syntax Description Parameters Restrictions Example usage: To configure bandwidth control: DES-3800:4#config bandwidth_control 1-8 rx_rate 64 tx_rate Command: config bandwidth_control 1-8 rx_rate 64 tx_rate 64 Success.
  • Page 106 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#show bandwidth_control 1-10 Command: show bandwidth_control 1-10 Bandwidth Control Table Port RX Rate (Mbit/sec) TX_RATE (Mbit/sec) ---- ------------------------ no_limit no_limit no_limit no_limit no_limit no_limit no_limit no_limit no_limit no_limit...
  • Page 107 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To configure the traffic scheduling mechanism for each queue: DES-3800:4# config scheduling 0 max_packet 12 Command: config scheduling 0 max_packet 12 Success. DES-3800:4# show scheduling Purpose...
  • Page 108 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config 802.1p user_priority Description Restrictions Example usage: To configure 802.1 user priority on the Switch: DES-3800:4# config 802.1p user_priority 1 7 Command: config 802.1p user_priority 1 7 Success.
  • Page 109 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show 802.1p user_priority Purpose Syntax Description Parameters Restrictions Example usage: To show 802.1p user priority: DES-3800:4#show 802.1p user_priority Command: show 802.1p user_priority QOS Class of Traffic Priority-0 -> <Class-2>...
  • Page 110 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To configure 802.1p default priority on the Switch: DES-3800:4#config 802.1p default_priority all 5 Command: config 802.1p default_priority all 5 Success. DES-3800:4# show 802.1 default_priority Purpose Syntax...
  • Page 111 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# config scheduling_mechanism Purpose Syntax Description Parameters Restrictions Example usage: To configure the traffic scheduling mechanism for each COS queue: DES-3800:4#config scheduling_mechanism strict Command: config scheduling_mechanism strict Success.
  • Page 112 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show scheduling_mechanism Parameters Restrictions Example Usage: To show the scheduling mechanism: DES-3800:4#show scheduling_mechanism Command: show scheduling_mechanism QOS scheduling_mechanism CLASS ID Mechanism -------- ----------- Class-0 strict Class-1 strict Class-2 strict...

  • Page 113: Port Mirroring Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Port Mirroring Commands The port mirroring commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config mirror port...
  • Page 114 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To add the mirroring ports: DES-3800:4# config mirror port 1 add source ports 2-7 both Command: config mirror port 1 add source ports 2-7 both Success.
  • Page 115 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable mirror Purpose Syntax Description Parameters Restrictions Example usage: To disable mirroring configurations: DES-3800:4#disable mirror Command: disable mirror Success. DES-3800:4# show mirror Purpose Syntax Description Parameters Restrictions Example usage:...

  • Page 116: Vlan Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual VLAN Commands The VLAN commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create vlan delete vlan config vlan...
  • Page 117 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command: create vlan v1 tag 2 Success. DES-3800:4# delete vlan Purpose Syntax Description Parameters Restrictions Example usage: To remove the vlan “v1”: DES-3800:4#delete vlan v1 Command: delete vlan v1 Success.
  • Page 118 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To add 4 through 8 as tagged ports to the VLAN v1: DES-3800:4#config vlan v1 add tagged 4-8 Command: config vlan v1 add tagged 4-8 Success.
  • Page 119 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual acceptable_frame tagged_only pvid 2 Success. DES-3800:4# enable gvrp Purpose Syntax Description Parameters Restrictions Example usage: To enable the generic VLAN Registration Protocol (GVRP): DES-3800:4#enable gvrp Command: enable gvrp Success.
  • Page 120 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show vlan Purpose Syntax Description Parameters Restrictions Example usage: To display the Switch’s current VLAN settings: DES-3800:4#show vlan Command: show vlan VLAN TYPE Member ports Static ports Current Untagged ports : 1,5-26...
  • Page 121 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To display GVRP port status: DES-3800:4#show gvrp Command: show gvrp Global GVRP : Disabled Port PVID ------ ---- Total Entries : 24 DES-3800:4# GVRP Ingress Checking Acceptable Frame Type...

  • Page 122: Link Aggregation Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Link Aggregation Commands The link aggregation commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create link_aggregation group_id...
  • Page 123 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To create a link aggregation group: DES-3800:4#create link_aggregation group_id 1 Command: create link_aggregation group_id 1 Success. DES-3800:4# delete link_aggregation group_id Purpose Syntax Description Parameters Restrictions Example usage: To delete link aggregation group:...
  • Page 124 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config link_aggregation Restrictions Example usage: To define a load-sharing group of ports, group-id 1,master port 5 with group members ports 5-7 plus port 9: DES-3800:4#config link_aggregation group_id 1 master_port 1 ports 5-7, 9 Command: config link_aggregation group_id 1 master_port 1 ports 5-7, 9 Success.
  • Page 125 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# show link_aggregation Purpose Syntax Description Parameters Restrictions Example usage: To display Link Aggregation configuration: DES-3800:4#show link_aggregation Command: show link_aggregation Link Aggregation Algorithm = MAC-source-dest Group ID Master Port...
  • Page 126 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config lacp_ports Restrictions Example usage: To configure LACP port mode settings: DES-3800:4#config lacp_port 1-12 mode active Command: config lacp_port 1-12 mode active Success. DES-3800:4# show lacp_port Purpose Syntax...
  • Page 127 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Active Active DES-3800:4#...

  • Page 128: Ip-Mac Binding

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual IP-MAC Binding The IP-MAC Binding commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create address_binding ip_mac ipaddress...
  • Page 129 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config address_binding ip_mac ipaddress Purpose Syntax Description Parameters Restrictions Example usage: To config address binding on the switch: DES-3800:4#config address_binding ip_mac ipaddress 10.1.1.3 mac_address 00-00-00-00-00-05 Command: config address_binding ip_mac ipaddress 10.1.1.3 mac_address 00-00-00-00-00-05...
  • Page 130 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# show address_binding Purpose Syntax Description Parameters Restrictions Example usage: To show IP-MAC Binding on the switch: DES-3800:4#show address_binding ip_mac ipaddress 10.1.1.8 mac_address 00-00-00-00-00-12 Command: show address_binding ip_mac ipaddress 10.1.1.8 mac_address 00-00-00-00-00-12...
  • Page 131 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual delete address-binding Purpose Syntax Description Parameters Restrictions Example usage: To delete an IP-MAC Binding on the switch: DES-3800:4#delete address-binding ip-mac ipaddress 10.1.1.1 mac_address 00-00-00-00-00-06 Command: delete address-binding ip-mac ipaddress 10.1.1.1 mac_address 00-00-00-00-00-06...

  • Page 132: Basic Ip Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Basic IP Commands The IP interface commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config ipif show ipif enable autoconfig* Each command is listed, in detail, in the following sections.
  • Page 133 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#config ipif System ipaddress 10.48.74.122/8 Command: config ipif System ipaddress 10.48.74.122/8 Success. DES-3800:4# show ipif Purpose Syntax Description Parameters Restrictions Example usage: To display IP interface settings. DES-3800:4#show ipif System...
  • Page 134 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable autoconfig Restrictions When autoconfig is enabled, the Switch becomes a DHCP client automatically (same as: config ipif System dhcp). The DHCP server must have the TFTP server IP address and configuration file name, and be configured to deliver this information in the data field of the DHCP reply packet.

  • Page 135: Igmp Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual IGMP Commands The IGMP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config igmp show igmp show igmp group Each command is listed, in detail, in the following sections.
  • Page 136 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To configure the IGMPv2 for all IP interfaces. DES-3800:4#config igmp all version 2 Command: config igmp all version 2 Success. DES-3800:4# show igmp Purpose Syntax Description Parameters Restrictions...
  • Page 137 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To display IGMP configurations: DES-3800:4#show igmp Command: show igmp IGMP Interface Configurations Interface IP Address/Netmask Ver- Query ------------ --------------- System 10.90.90.90/8 20.1.1.1/8 Total Entries: 2 DES-3800:4# show igmp group...

  • Page 138: Igmp Snooping Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual IGMP Snooping Commands The IGMP Snooping commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config igmp_snooping config igmp_snooping...
  • Page 139 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config igmp_snooping Restrictions Example usage: To configure IGMP snooping: DES-3800:4#config igmp_snooping default host_timeout 250 state enable Command: config igmp_snooping default host_timeout 250 state enable Success. DES-3800:4# NOTE: The Fast Leave function in the config igmp_snooping command can only be implemented if IGMP is disabled for all IP interfaces on the Switch.
  • Page 140 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config igmp_snooping querier Restrictions Example usage: To configure IGMP snooping: DES-3800:4#config igmp_snooping querier default query_interval 125 state enable Command: config igmp_snooping querier default query_interval 125 state enable Success.
  • Page 141 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config router_ports Purpose Syntax Description Parameters Restrictions Example usage: To set up static router ports: DES-3800:4#config router_ports default add 1-10 Command: config router_ports default add 1-10 Success. DES-3800:4#...
  • Page 142 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable igmp_snooping Purpose Syntax Description Parameters Restrictions Example usage: To disable IGMP snooping on the Switch: DES-3800:4#disable igmp_snooping Command: disable igmp_snooping Success. DES-3800:4# Example usage: To disable forwarding all multicast traffic to a multicast-enabled router:...
  • Page 143 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command: show igmp_snooping IGMP Snooping Global State Multicast router Only VLAN Name Query Interval Max Response Time Robustness Value Last Member Query Interval Host Timeout Route Timeout Leave Timer...
  • Page 144 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Reports Port Member : 2,5 VLAN Name : default Multicast group: 224.0.0.9 MAC address : 01-00-5E-00-00-09 Reports Port Member : 6,8 VLAN Name : default Multicast group: 234.5.6.7...
  • Page 145 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show router_ports Restrictions Example usage: To display the router ports. DES-3800:4#show router_ports Command: show router_ports VLAN Name Static router port Dynamic router port : Total Entries: 1 DES-3800:4#...
  • Page 146 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show igmp_snooping group Purpose Syntax Description Parameters Restrictions Example usage: To view the current IGMP snooping group: DES-3800:4#show igmp_snooping group Command: show igmp_snooping group VLAN Name Multicast group...
  • Page 147 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#...

  • Page 148: Dhcp Relay

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DHCP Relay The DHCP relay commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config dhcp_relay config dhcp_relay...
  • Page 149 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config dhcp_relay add ipif Purpose Used to add an IP destination address to the switch's DHCP/BOOTP re lay table. Syntax config dhcp_relay add ipif <ipif_name 12> <ipaddr> Description This command adds an IP address as a destination to forward (relay) DHCP/BOOTP relay packets to.
  • Page 150 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config dhcp_relay option_82 state Purpose Used to configure the state of DHCP relay agent information option 82 of the switch. Syntax config dhcp_relay option_82 state [enable | disable]...
  • Page 151 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config dhcp_relay option_82 check Purpose Used to configure the checking mechanism of DHCP relay agent information option 82 of the switch. Syntax config dhcp_relay option_82 check [enable | disable]...
  • Page 152 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#config dhcp_relay option_82 policy replace Command: config dhcp_relay option_82 policy replace Success. DES-3800:4# show dhcp_relay Purpose Used to display the current DHCP/BOOTP relay configuration. Syntax show dhcp_relay {ipif <ipif_name 12>}...
  • Page 153 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable dhcp_relay Purpose Used to enable the DHCP/BOOTP relay function on the switch. Syntax enable dhcp_relay Description This command is used to enable the DHCP/BOOTP relay function on the switch.

  • Page 154: 802.1X Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 802.1X Commands The DES-3828 implements the server-side of the IEEE 802.1x Port-based and MAC-based Network Access Control. This mechanism is intended to allow only authorized users, or other network devices, access to network resources by establishing criteria for each port on the Switch that a user or network device must meet before allowing that port to forward or receive frames.
  • Page 155 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable 802.1x Parameters None. Restrictions Only administrator-level users can issue this command. Example usage: To enable 802.1x switch wide: DES-3800:4#enable 802.1x Command: enable 802.1x Success. DES-3800:4# disable 802.1x Purpose Used to disable the 802.1x server on the Switch.
  • Page 156 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show 802.1x auth_configuration Port number − Shows the physical port number on the Switch. Capability: Authenticator|None − Shows the capability of 802.1x functions on the port number displayed above. There are two 802.1x capabilities that can be set on the Switch: Authenticator and None.
  • Page 157 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual CTRL+C ESC q show 802.1x auth_state Purpose Used to display the current authentication state of the 802.1x server on the Switch. Syntax show 802.1x auth_state {ports <portlist>} Description The show 802.1x auth_state command is used to display the current...
  • Page 158 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual ForceAuth ForceAuth ForceAuth ForceAuth ForceAuth ForceAuth ForceAuth ForceAuth ForceAuth ForceAuth CTRL+C ESC q Example usage: To display the 802.1x auth state for MAC-based 802.1x: DES-3800:4#show 802.1x auth_state Command: show 802.1x auth_state...
  • Page 159 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Config 802.1x auth_mode Parameters Restrictions Example usage: To configure 802.1x authentication by MAC address: DES-3800:4#config 802.1x auth_mode mac_based Command: config 802.1x auth_mode mac_based Success. DES-3800:4# Config 802.1x capability ports...
  • Page 160 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config 802.1x auth_parameter port_control [force_unauth | auto | force_auth] | quiet_period <sec 0-65535> | tx_period <sec 1-65535> | supp_timeout <sec 1-65535> | server_timeout <sec 1-65535> | max_req <value 1-10> | reauth_period <sec 1-65535> | enable_reauth [enable |...
  • Page 161 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Config 802.1x init Purpose Syntax Description Parameters Restrictions Example usage: To initialize the authentication state machine of all ports: DES-3800:4# config 802.1x init port_based ports all Command: config 802.1x init port_based ports all Success.
  • Page 162 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To configure 802.1x reauthentication for ports 1-18: DES-3800:4#config 802.1x reauth port_based ports 1-18 Command: config 802.1x reauth port_based ports 1-18 Success. DES-3800:4# config radius add Purpose Used to configure the settings the Switch will use to communicate with a RADIUS server.
  • Page 163 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config radius delete Purpose Syntax Description Parameters Restrictions Example usage: To delete previously configured RADIUS server communication settings: DES-3800:4#config radius delete 1 Command: config radius delete 1 Success.
  • Page 164 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Success. DES-3800:4# Show radius Purpose Syntax Description Parameters Restrictions Example usage: To display RADIUS settings on the Switch: DES-3800:4#show radius Command: show radius Index IP Address ----- ------------------ 10.1.1.1...

  • Page 165: Access Control List (Acl) Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Access Control List (ACL) Commands The DES-3828 implements Access Control Lists that enable the Switch to deny network access to specific devices or device groups based on IP settings, MAC address, and packet content.
  • Page 166 Switch. Each source IP address the Switch finds will be combined with the source_ip_mask with a logical AND operation. The profile_id parameter is used to give the access profile an identifying number − in this case, 1. The deny parameter instructs the Switch to filter any frames that meet the criteria − in Parameters 0xffffffff>...
  • Page 167 AND operation between an IP address specified in the next step and the ip_source_mask match. The default for an access profile on the Switch is to permit traffic flow. If you want to restrict traffic, you must use the deny parameter.
  • Page 168 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual port 7 deny – a single access rule was created. This rule will subtract one rule available for the port group 1 – 8, as well as one rule from the total available rules.In order to address this functional limitation of the chip set, an additional function, CPU Interface Filtering, has been added.
  • Page 169 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command Each command is listed, in detail, in the following sections. create access_profile (for Ethernet) Purpose Syntax Description Parameters Restrictions Example usage: To create a Ethernet access profile: DES-3800:4#create access_profile ethernet vlan 802.1p profile_id 1...
  • Page 170 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config access_profile profile_id (for Ethernet) Purpose Used to configure the Ethernet access profile on the Switch and to define specific values for the rules that will be used to by the Switch to determine if a given packet should be forwarded or filtered.
  • Page 171 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config access_profile profile_id (for Ethernet) Restrictions Example usage: To configure a rule for the Ethernet access profile: DES-3800:4#config access profile profile_id 1 add access_id 1 ethernet vlan Trinity 802.1p 1 port 1:1 permit priority 1 replace priority Command: config access profile profile_id 1 add access_id 1 ethernet vlan Trinity 802.1p 1 port 1:1 permit priority 1 replace priority...
  • Page 172 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create access_profile (IP) the packet header. Specific values for rules pertaining to the IP part of the packet header may be defined by configuring the config access_profile command for IP, as stated below.
  • Page 173 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To configure a rule for the Ethernet access profile: DES-3800:4#create access_profile ip protocol_id profile_id 2 Command: create access_profile ip protocol_id profile_id 2 Success. DES-3800:4# config access_profile profile_id (IP)
  • Page 174 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config access_profile profile_id (IP) Control Message Protocol (ICMP) field within each packet. type <value 0-255> − Specifies that the access profile will • apply to this ICMP type defined by a value between 0 and 255.
  • Page 175 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config access_profile profile_id (IP) Restrictions Example usage: To configure a rule for the IP access profile: DES-3800:4#config access_profile profile_id 2 add access_id 2 ip protocol_id 2 port 1:2 deny...
  • Page 176 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create access_profile (packet content mask) Description Parameters Restrictions Example usage: To create an Access profile by packet content mask: DES-3800:4#create access_profile packet_content_mask offset_0-15 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF 0xFFFFFFFF offset_16-31 0xFFFF...
  • Page 177 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config access_profile profile_id (packet content mask) 0xffffffff> <hex 0x0-0xffffffff> | offset_64-79 <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex 0x0-0xffffffff> <hex0x0-0xffffffff>} port <port> [permit {priority <value 0-7> {replace_priority} | replace_dscp <value 0-63> } | deny] delete <value 1-100>]...
  • Page 178 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config access_profile profile_id (packet content mask) Restrictions Example usage: To create an access profile by packet content mask: DES-3800:4# config access_profile profile_id 3 add access_id 1 packet_content offset_0-15 0x11111111 0x11111111 0x11111111...
  • Page 179 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show access_profile Purpose Syntax Description Parameters Restrictions Example usage: To display all of the currently configured access profiles on the Switch: DES-3800:4#show access_profile Command: show access_profile Access Profile Table...
  • Page 180 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual ====================================================================== Total Entries: 3 DES-3800:4# create cpu access_profile Purpose Used to create an access profile specifically for CPU Interface Filtering on the Switch and to define which parts of each incoming frame’s header the Switch will examine.
  • Page 181 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create cpu access_profile dscp − Specifies that the switch will examine the DiffServ Code • Point (DSCP) field in each frame’s header. icmp − Specifies that the switch will examine the Internet Control •...
  • Page 182 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create cpu access_profile port <portlist> - Specifies a range of ports to be configured. The beginning and end of the port list range are separated by a dash. For example, 1-4 specifies all of the ports between port 1 and port 4.
  • Page 183 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config cpu access_profile Purpose Used to configure a cpu access profile used for CPU Interface Filtering and to define specific values that will be used to by the Switch to determine if a given packet should be forwarded or filtered.
  • Page 184 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config cpu access_profile source_ip <ipaddr> − Specifies that the access profile will apply to only packets with this source IP address. destination_ip <ipaddr> − Specifies that the access profile will apply to only packets with this destination IP address.
  • Page 185 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config cpu access_profile permit | deny – Specify that the packet matching the criteria configured with command will either be permitted entry to the cpu or denied entry to the cpu.
  • Page 186 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable cpu_interface_filtering Syntax Description Parameters Restrictions Example Usage: To disable RMON: DES-3800:4#disable cpu_interface_filtering Command: disable cpu_interface_filtering Success. DES-3800:4# show cpu_interface_filtering Purpose Used to view the current running state of the CPU filtering mechanism on the Switch.
  • Page 187 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show cpu_access_profile Parameters profile_id <value 1-255> − Enter an integer between 1 and 255 that is used to identify the cpu access profile to be deleted with this command. This...

  • Page 188: Cpu Protection Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual CPU Protection Commands The CPU filtering mechanism can be protected from ARP broadcast storms by using the config arp_storm command. ARP packets being sent to the CPU filtering mechanism can be limited by setting the ARP Storm Control Threshold.
  • Page 189 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#show arp_storm Command: show arp_storm ARP Storm Control State : Enable ARP Storm Control Threshold: 8 kbytes/sec DES-3800:4#...

  • Page 190: Traffic Segmentation Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Traffic Segmentation Commands Traffic segmentation allows you to further sub-divide VLANs into smaller groups of ports that will help to reduce traffic on the VLAN. The VLAN rules take precedence, and then the traffic segmentation rules are applied.
  • Page 191 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show traffic_segmentation Syntax Description Parameters Restrictions Example usage: To display the current traffic segmentation configuration on the Switch. DES-3800:4#show traffic_segmentation Command: show traffic_segmentation Traffic Segmentation Table Port Forward Portlist...

  • Page 192: Time And Sntp Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Time and SNTP Commands The Simple Network Time Protocol (SNTP) (an adaptation of the Network Time Protocol (NTP)) commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table.
  • Page 193 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To configure SNTP settings: DES-3800:4#config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval Command: config sntp primary 10.1.1.1 secondary 10.1.1.2 poll-interval 30 Success. DES-3800:4# show sntp Purpose Syntax Description Parameters...
  • Page 194 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#enable sntp Command: enable sntp Success. DES-3800:4# disable sntp Purpose Syntax Description Parameters Restrictions Example: To disable SNTP support: DES-3800:4#disable sntp Command: disable sntp Success. DES-3800:4# config time...
  • Page 195 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#config time 30jun2003 16:30:30 Command: config time 30jun2003 16:30:30 Success. DES-3800:4# config time_zone Purpose Syntax Description Parameters Restrictions Example usage: To configure time zone settings: DES-3800:4#config time_zone operator + hour 2 min 30 Command: config time_zone operator + hour 2 min 30 Success.
  • Page 196 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config dst Parameters disable - Disable the DST seasonal time adjustment for the Switch. repeating - Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST beginning and ending date be specified using a formula.
  • Page 197 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30 Command: config dst repeating s_week 2 s_day tue s_mth 4 s_time 15:00 e_week 2 e_day wed e_mth 10 e_time 15:30 offset 30 Success.

  • Page 198: Arp Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual ARP Commands The ARP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create arpentry config arpentry delete arpentry...
  • Page 199 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config arpentry Parameters Restrictions Example Usage: To configure a static arp entry for the IP address 10.48.74.12 and MAC address 00:50:BA:00:07:36: DES-3800:4#config arpentry 10.48.74.12 00-50-BA-00-07-36 Command: config arpentry 10.48.74.12 00-50-BA-00-07-36 Success.
  • Page 200 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config arp_aging time Description Parameters Restrictions Example Usage: To configure ARP aging time: show arpentry Purpose Used to display the ARP table. Syntax show arpentry {ipif <ipif_name 12> | ipaddress <ipaddr> | static} Description This command is used to display the current contents of the Switch’s ARP table.
  • Page 201 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual System System System System System System System System System System Total Entries = 20 DES-3800:4# clear arptable Purpose Syntax Description Parameters Restrictions Example Usage: To remove dynamic entries in the ARP table:...

  • Page 202: Vrrp Commands

    To configure VRRP for virtual routers on the Switch, an IP interface must be present on the system and it must be a part of a VLAN. VRRP IP interfaces may be assigned to every VLAN, and therefore IP interface, on the Switch.
  • Page 203 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable vrrp Restrictions Example Usage: To enable VRRP globally on the Switch: DES-3800:4#enable vrrp Command: enable vrrp Success. DES-3800:4# Example usage: To enable the virtual IP address to be pinged:...
  • Page 204 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To disable the virtual IP address from being pinged: DES-3800:4#disable vrrp ping Command: disable vrrp ping Success. DES-3800:4# create vrrp vrid Purpose Syntax Description Parameters To create a VRRP router on the Switch.
  • Page 205 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create vrrp vrid Restrictions Example usage: To create a VRRP entry: DES-3800:4#create vrrp vrid 1 ipif Darren ipaddress 11.1.1.1 state enable priority 200 advertisement_interval 1 preempt true critical_ip 10.53.13.224 critical_ip_state enable Command: create vrrp vrid 1 ipif Darren ipaddress 11.1.1.1 state enable...
  • Page 206 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config vrrp vrid Restrictions Example usage: To configure a VRRP entry: DES-3800:4#config vrrp vrid 1 ipif Trinity state enable priority 100 advertisement_interval 2 Command: config vrrp vrid 1 ipif Trinity state enable priority 100 advertisement_interval 2 Success.
  • Page 207 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config vrrp ipif Purpose Syntax Description Parameters Restrictions Example usage: To set the authentication type for a VRRP entry: DES-3800:4#config vrrp ipif Trinity authtype simple authdata tomato Command: config vrrp ipif Trinity authtype simple authdata tomato Success.
  • Page 208 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example Usage: To view the global VRRP settings currently implemented on the Switch (VRRP Enabled): DES-3800:4#show vrrp Command: show vrrp Global VRRP Non-owner response PING : Disabled Interface Name...

  • Page 209: Routing Table Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Routing Table Commands The routing table commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create iproute create iproute default...
  • Page 210 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create iproute default Purpose Syntax Description Parameters Restrictions Example Usage: To add the default static address 10.48.74.121, with a metric setting of 1, to the routing table: DES-3800:4#create iproute default 10.48.74.121 1 Command: create iproute default 10.48.74.121 1...
  • Page 211 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# delete iproute default Purpose Syntax Description Parameters Restrictions Example usage: To delete the default IP route 10.53.13.254: DES-3800:4#delete iproute default 10.53.13.254 Command: delete iproute default 10.53.13.254 Success.
  • Page 212 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#show iproute Command: show iproute Routing Table IP Address/Netmask Gateway ------------------ -------------- ------------ 10.0.0.0/8 0.0.0.0 Total Entries : 1 DES-3800:4# Interface Hops Protocol ------- -------- System Local...

  • Page 213: Route Redistribution Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Route Redistribution Commands The route redistribution commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create route redistribute...
  • Page 214 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Static Local Allowed Metric Type combinations are mettype 1 or mettype 2. The metric value 0 above will be redistributed in OSPF as the metric 20. Example Usage:...
  • Page 215 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Routing information source − OSPF and the Static Route table. Routing information will be redistributed to RIP. The following table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be redistributed.
  • Page 216 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config route redistribute dst ospf src Restrictions Routing information source − RIP: the Static Route table, and the Local interface routing information. Routing information will be redistributed to OSPF. The following table lists the allowed values for the routing metrics and the types (or forms) of the routing information that will be redistributed.
  • Page 217 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config route redistribute dst rip src Parameters Restrictions Example Usage: To configure route redistributions: DES-3800:4#config route redistribute dst ospf src rip mettype type_1 metric 2 Command: config route redistribute dst ospf src rip mettype type_1 metric 2 Success.
  • Page 218 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example Usage: To delete route redistribution settings: DES-3800:4#delete route redistribute dst rip src ospf Command: delete route redistribute dst rip src ospf Success. DES-3800:4# show route redistribute Purpose...

  • Page 219: Dns Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DNS Commands The DNS relay commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config dnsr enable dnsr...
  • Page 220 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#config dnsr add static dns1 10.43.21.12 Command: config dnsr add static dns1 10.43.21.12 Success. DES-3800:4# Example Usage: To delete an entry domain name dns1, IP address 10.43.21.12 from DNS static table.
  • Page 221 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# Example Usage: To enable static table lookup for DNS relay. DES-3800:4#enable dnsr static Command: enable dnsr static Success. DES-3800:4# disable dnsr Purpose Syntax Description Parameters Restrictions Example Usage: To disable status of DNS relay.
  • Page 222 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Success. DES-3800:4# show dnsr Purpose Syntax Description Parameters Restrictions Example Usage: To display DNS relay status: DES-3800:4#show dnsr Command: show dnsr DNSR Status Primary Name Server Secondary Name Server...

  • Page 223: Rip Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual RIP Commands The RIP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config rip enable rip disable rip show rip Each command is listed, in detail, in the following sections.
  • Page 224 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config rip Restrictions Example Usage: To change the RIP receive mode for the IP interface System: DES-3800:4#config rip ipif System rx_mode v1_only Command: config rip ipif System rx_mode v1_only Success.
  • Page 225 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable rip Purpose Syntax Description Parameters Restrictions Example Usage: To disable rip: DES-3800:4#disable rip Command: disable rip Success. DES-3800:4# show rip Purpose Syntax Description Parameters Restrictions Example Usage:...

  • Page 226: Dvmrp Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DVMRP Commands The DVMRP commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config dvmrp enable dvmrp disable dvmrp...
  • Page 227 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config dvmrp Restrictions Example Usage: To configure DVMRP configurations of IP interface System: DES-3800:4#config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5 Command: config dvmrp ipif System neighbor_timeout 30 metric 1 probe 5...
  • Page 228 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command: disable dvmrp Success. DES-3800:4# show dvmrp routing_table Purpose Syntax Description Parameters Restrictions Example Usage: To display DVMRP routing table: DES-3800:4#show dvmrp routing_table Command: show dvmrp routing_table DVMRP Routing Table...
  • Page 229 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example Usage: To display DVMRP neighbor table: DES-3800:4#show dvmrp neighbor Command: show dvmrp neighbor DVMRP Neighbor Address Table Interface Neighbor Address Generation ID --------------- ----------------------- System 10.2.1.123 Total Entries: 1...
  • Page 230 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show dvmrp Purpose Syntax Description Parameters Restrictions Example Usage: To show DVMRP configurations: DES-3800:4#show dvmrp Command: show dvmrp DVMRP Global State : Disabled Interface IP Address ------------ --------------- System 10.90.90.90/8...

  • Page 231: Pim Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual PIM Commands The PIM commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config pim enable pim disable pim...
  • Page 232 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#config pim ipif System hello 35 jp_interval 70 state enable Command: config pim ipif System hello 35 jp_interval 70 state enable Success. DES-3800:4# enable pim Purpose Syntax Description...
  • Page 233 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show pim neighbor Purpose Syntax Description Parameters Restrictions Example usage: To display PIM settings as configured on the Switch: DES-3800:4#show pim neighbor Command: show pim neighbor PIM Neighbor Address Table...
  • Page 234 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command: show pim PIM Global State : Disabled PIM-DM Interface Table Interface IP Address ------------ --------------- System 10.90.90.90/8 35 Total Entries : 1 DES-3800:4# Hello Join/Prune Interval Interval...

  • Page 235: Ip Multicasting Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual IP Multicasting Commands The IP multicasting commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command show ipmc cache show ipmc Each command is listed, in detail, in the following sections.
  • Page 236 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show ipmc Description Parameters Restrictions Usage Example To display the current IP multicast interface table by DVMRP entry: DES-3800:4#show ipmc protocol dvmrp Command: show ipmc protocol dvmrp Interface Name...

  • Page 237: Md5 Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual MD5 Commands The MD5 configuration commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command create md5 key config md5 key...
  • Page 238 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To configure an MD5 Key password: DES-3800:4#config md5 key 1 taboo Command: config md5 key 1 taboo Success. DES-3800:4# delete md5 key Purpose Syntax Description Parameters Restrictions Usage Example...
  • Page 239 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual develop fireball intelligent Total Entries: 4 DES-3800:4#...

  • Page 240: Ospf Configuration Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual OSPF Configuration Commands The OSPF configuration commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config ospf router_id...
  • Page 241 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command config ospf virtual_link delete ospf virtual_link show ospf virtual_link Each command is listed, in detail, in the following sections. config ospf router_id Purpose Syntax Description Parameters Restrictions...
  • Page 242 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable ospf Purpose Syntax Description Parameters Restrictions Usage Example To disable OSPF on the Switch: DES-3800:4#disable ospf Command: disable ospf Success. DES-3800:4# show ospf Purpose Syntax Description Parameters...
  • Page 243 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual ------------ ------------------ --------- System 10.90.90.90/8 0.0.0.0 20.1.1.1/8 0.0.0.0 30.1.1.1/8 0.0.0.0 Total Entries : 3 OSPF Area Settings Area ID Type Stub Import Summary LSA Stub Default Cost --------------- ------ ----------------------- 0.0.0.0...
  • Page 244 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create ospf area Restrictions Usage Example: To create an OSPF area: DES-3800:4#create ospf area 10.48.74.122 type normal Command: create ospf area 10.48.74.122 type normal Success. DES-3800:4# delete ospf area...
  • Page 245 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config ospf area Parameters Restrictions Usage Example To configure an OSPF area’s settings: DES-3800:4#config ospf area 10.48.74.122 type stub stub_summary enable metric 1 Command: config ospf area 10.48.74.122 type stub stub_summary enable metric 1 Success.
  • Page 246 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create ospf host_route Purpose Syntax Description Parameters Restrictions Usage Example To configure the OSPF host route settings: DES-3800:4#create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Command: create ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Success.
  • Page 247 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config ospf host_route Syntax Description Parameters Restrictions Usage Example To configure an OSPF host route: DES-3800:4#config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Command: config ospf host_route 10.48.74.122 area 10.1.1.1 metric 2 Success.
  • Page 248 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create ospf aggregation Purpose Syntax Description Parameters Restrictions Usage Example: To create an OSPF area aggregation: DES-3800:4#create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Command: create ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Success.
  • Page 249 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command: delete ospf aggregation 10.1.1.1 10.48.76..122/16 lsdb_type summary Success. DES-3800:4# config ospf aggregation Purpose Syntax Description Parameters Restrictions Usage Example To configure the OSPF area aggregation settings: DES-3800:4#config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type summary advertise enable Command: config ospf aggregation 10.1.1.1 10.48.76.122/16 lsdb_type...
  • Page 250 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual To display OSPF area aggregation settings: DES-3800:4#show ospf aggregation Command: show ospf aggregation OSPF Area Aggregation Settings Area ID Aggregated Network Address Type ------------ --------------------- 10.1.1.1 10.0.0.0/8 10.1.1.1 20.2.0.0/16...
  • Page 251 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual 1.0.0.0 Summary 1.0.0.0 Summary ASExtLink Total Entries: 5 DES-3800:4# show ospf neighbor Purpose Syntax Description Parameters Restrictions Usage Example To display the current OSPF neighbor router table: DES-3800:4#show ospf neighbor...
  • Page 252 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#show ospf virtual_neighbor Command: show ospf virtual_neighbor Transit Router ID of Area ID Virtual Neighbor Virtual Neighbor State ------------ ---------------- 10.1.1.1 10.2.3.4 Total Entries : 1 DES-3800:4# config ospf ipif Purpose Used to configure the OSPF interface settings.
  • Page 253 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config ospf ipif Restrictions Usage Example To configure OSPF interface settings: DES-3800:4#config ospf ipif System priority 2 hello_interval 15 metric 2 state enable Command: config ospf ipif System priority 2 hello_interval 15 metric 2 state enable Success.
  • Page 254 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show ospf all Purpose Syntax Description Parameters Restrictions Usage Example: To display the current OSPF interface settings, for all OSPF interfaces on the Switch: DES-3800:4#show ospf all Command: show ospf all...
  • Page 255 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create ospf virtual_link Restrictions Usage Example To create an OSPF virtual interface: DES-3800:4#create ospf virtual_link 10.1.12 20.1.1.1 hello_interval 10 Command: create ospf virtual_link 10.1.12 20.1.1.1 hello_interval 10 Success.
  • Page 256 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config ospf virtual_link Restrictions Usage Example To configure the OSPF virtual interface settings: DES-3800:4#config ospf virtual_link 10.1.1.2 20.1.1.1 hello_interval 10 Command: config ospf virtual_link 10.1.1.2 20.1.1.1 hello_interval 10 Success.
  • Page 257 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Usage Example: To delete an OSPF virtual interface from the Switch: DES-3800:4#delete ospf virtual_link 10.1.12 20.1.1.1 Command: delete ospf virtual_link 10.1.12 20.1.1.1 Success. DES-3800:4# show ospf virtual_link Purpose...

  • Page 258: Mac Notification Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual MAC Notification Commands The MAC notification commands in the Command Line Interface (CLI) are listed, in the following table, along with their appropriate parameters. Command enable mac_notification disable mac_notification...
  • Page 259 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable mac_notification Restrictions Example Usage: To disable MAC notification without changing basic configuration: DES-3800:4#disable mac_notification Command: disable mac_notification Success. DES-3800:4# config mac_notification Purpose Syntax Description Parameters Restrictions Example usage: To configure the Switch’s MAC address table notification global settings:...
  • Page 260 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config mac_notification ports Parameters <portlist> - Specify a port or range of ports to be configured. all – Entering this command will set all ports on the system.
  • Page 261 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show mac_notification ports Syntax Description Parameters Restrictions Example usage: To display all port’s MAC address table notification status settings: DES-3800:4#show mac_notification ports Command: show mac_notification ports Port # MAC Address Table Notification State...

  • Page 262: Access Authentication Control Commands

    RADIUS protocols. These built-in server groups are used to authenticate users trying to access the Switch. The users will set server hosts in a preferable order in the built-in server group and when a user tries to gain access to the Switch, the Switch will ask the first server host for authentication. If no...
  • Page 263 (TACACS / XTACACS / TACACS+ / RADIUS / local / none) for authentication. These techniques will be listed in an order preferable, and defined by the user for normal user authentication on the Switch, and may contain up to eight authentication techniques. When a user attempts to access the Switch, the Switch will select the first technique listed for authentication.
  • Page 264 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command Parameters server_group config authen [tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete] server_host <ipaddr> server_group protocol [tacacs | xtacacs | tacacs+ | radius] delete authen <string 15>...
  • Page 265 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual disable authen_policy Purpose Used to disable system access authentication policy. Syntax disable authen_policy Description This command will disable the administrator-defined authentication policy for users trying to access the Switch. When disabled, the Switch will access the local user account database for username and password verification.
  • Page 266 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create authen_login method_list_name Purpose Syntax Description Parameters Restrictions Example usage: To create the method list “Trinity.”: DES-3800:4#create authen_login method_list_name Trinity Command: create authen_login method_list_name Trinity Success. DES-3800:4# config authen_login...
  • Page 267 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config authen_login method_list_name – Enter a previously implemented method list name defined by the user. The user may add one, or a combination of up to four (4) of the following authentication...
  • Page 268 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To configure the default method list with authentication methods xtacacs, tacacs+ and local, in that order: DES-3800:4#config authen_login default method xtacacs tacacs+ local Command: config authen_login default method xtacacs tacacs+ local Success.
  • Page 269 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show authen_login Restrictions Example usage: To view the authentication login method list named Trinity: DES-3800:4#show authen_login method_list_name Trinity Command: show authen_login method_list_name Trinity Method List Name Priority ----------------...
  • Page 270 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To create a user-defined method list, named “Permit” for promoting user privileges to Adminstrator privileges: DES-3800:4#create authen_enable method_list_name Permit Command: show authen_login method_list_name Permit Success. DES-3800:4#...
  • Page 271 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config authen_enable none – Adding this parameter will require no authentication to access the Switch. method_list_name – Enter a previously implemented method list name defined by the user (create authen_enable).
  • Page 272 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual delete authen_enable method_list_name Purpose Syntax Description Parameters Restrictions Example usage: To delete the user-defined method list “Permit” DES-3800:4#delete authen_enable method_list_name Permit Command: delete authen_enable method_list_name Permit Success. DES-3800:4#...
  • Page 273 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show authen_enable Restrictions None Example usage: To display all method lists for promoting user level privileges to administrator level privileges. DES-3800:4#show authen_enable all Command: show authen_enable all Method List Name Priority Method Name Comment...
  • Page 274 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config authen application Purpose Used to configure various applications on the Switch for authentication using a previously configured method list. Syntax config authen application [console | telnet | ssh | http | all] [login | enable] [default | method_list_name <string 15>]...
  • Page 275 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show authen application Purpose Syntax Description Parameters Restrictions Example usage: To display the login and enable method list for all applications on the Switch: DES-3800:4#show authen application Command: show authen application...
  • Page 276 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create authen server_host Purpose Used to create an authentication server host. Syntax create authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-65535> | key [<key_string 254> | none] | timeout <int 1-255> | retransmit <...
  • Page 277 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config authen server_host Syntax create authen server_host <ipaddr> protocol [tacacs | xtacacs | tacacs+ | radius] {port <int 1-65535> | key [<key_string 254> | none] | timeout <int 1-255> | retransmit <...
  • Page 278 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual delete authen server_host Purpose Syntax Description Parameters Restrictions Example usage: To delete a user-defined TACACS+ authentication server host: DES-3800:4#delete authen server_host 10.1.1.121 protocol tacacs+ Command: delete authen server_host 10.1.1.121 protocol tacacs+ Success.
  • Page 279 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show authen server_host Purpose Syntax Description Parameters Restrictions Example usage: To view authenticaion server hosts currently set on the Switch: DES-3800:4#show authen server_host Command: show authen server_host IP Address --------------- 10.53.13.94...
  • Page 280 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual create authen server_group Purpose Syntax Description Parameters Restrictions Example usage: To create the server group “group_1”: DES-3800:4#create authen server_group group_1 Command: create authen server_group group_1 Success. DES-3800:4# Used to create a user-defined authentication server group.
  • Page 281 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config authen server_group Purpose Used to configure a user-defined authentication server group. Syntax config authen server_group [tacacs | xtacacs | tacacs+ | radius | <string 15>] [add | delete] server_host <ipaddr>...
  • Page 282 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To add an authentication host to server group “group_1”: DES-3800:4# config authen server_group group_1 add server_host 10.1.1.121 protocol tacacs+ Command: config authen server_group group_1 add server_host 10.1.1.121 protocol tacacs+...
  • Page 283 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show authen server_group Purpose Syntax Description Parameters Restrictions Example usage: To view authentication server groups currently set on the Switch. DES-3800:4#show authen server_group Command: show authen server_group Group Name...
  • Page 284 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config authen parameter response_timeout Purpose Syntax Description Parameters Restrictions Example usage: To configure the response timeout for 60 seconds: DES-3800:4# config authen parameter response_timeout 60 Command: config authen parameter response_timeout 60 Success.
  • Page 285 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# show authen parameter Purpose Syntax Description Parameters Restrictions Example usage: To view the authentication parameters currently set on the Switch: DES-3800:4#show authen parameter Command: show authen parameter...
  • Page 286 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable admin Restrictions Example usage: To enable administrator privileges on the Switch: DES-3800:4#enable admin Password: ****** DES-3800:4# config admin local_enable Purpose Syntax Description Parameters Restrictions Example usage: To configure the password for the “local_enable” authentication method.

  • Page 287: Ssh Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual SSH Commands The steps required to use the Secure Shell (SSH) protocol for secure communication between a remote PC (the SSH Client) and the Switch (the SSH Server), are as follows: Create a user account with admin-level access using the create account admin <username>...
  • Page 288 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable shh Syntax Description Parameters Restrictions Usage Example: To enable SSH: DES-3800:4#enable ssh Command: enable ssh Success. DES-3800:4# disable ssh Purpose Syntax Description Parameters Restrictions Usage Example: To disable SSH:...
  • Page 289 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config ssh authmode Parameters Restrictions Example usage: To enable the SSH authentication mode by password: DES-3800:4#config ssh authmode password enable Command: config ssh authmode password enable Success. DES-3800:4#...
  • Page 290 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# config ssh server Purpose Syntax Description Parameters Restrictions Usage Example: To configure the SSH server: DES-3800:4# config ssh server maxsession 2 contimeout 300 authfail 2 Command: config ssh server maxsession 2 contimeout 300 authfail 2 Success.
  • Page 291 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual The SSH server configuration max Session Connection timeout Authfail attempts Rekey timeout port DES-3800:4# config ssh user Purpose Syntax Description Parameters Restrictions Example usage: To configure the SSH user:...
  • Page 292 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Enter the new password again for conformation:******* Success. DES-3800:4# show ssh user Purpose Syntax Description Parameters Restrictions Example usage: To display the SSH user: DES-3800:4#show ssh user Command: show ssh user...
  • Page 293 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config ssh algorithm AES192 - This parameter will enable or disable the Advanced Encryption Standard AES192 encryption algorithm. AES256 - This parameter will enable or disable the Advanced Encryption Standard AES256 encryption algorithm.
  • Page 294 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command: show ssh algorithm Encryption Algorithm 3DES :Enabled AES128 :Enabled AES192 :Enabled AES256 :Enabled ARC4 :Enabled Blowfish :Enabled Cast128 :Enabled Twofish128 :Enabled Twofish192 :Enabled Twofish256 :Enabled Data Integrity Algorithm...

  • Page 295: Ssl Commands

    The Switch supports two types of cryptology algorithms: Stream Ciphers – There are two types of stream ciphers on the Switch, RC4 with 40-bit keys and RC4 with 128-bit keys. These keys are used to encrypt messages and need to be consistent between client and host for optimal use.
  • Page 296 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command show ssl show ssl certificate show ssl cachetimeout download certificate_fromTFTP Each command is listed, in detail, in the following sections. enable ssl Purpose Syntax Description Parameters Restrictions...
  • Page 297 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Note: Web will be disabled if SSL is enabled. Success. DES-3800:4# NOTE: Enabling SSL on the Switch will enable all ciphersuites. To utilize a particular ciphersuite, the user must eliminate other ciphersuites by using the disable ssl command along with the appropriate ciphersuites.
  • Page 298 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#disable ssl Command: disable ssl Success. DES-3800:4# To disable ciphersuite RSA_EXPORT_with_RC4_40_MD5 only: DES-3800:4#disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5 Command: disable ssl ciphersuite RSA_EXPORT_with_RC4_40_MD5 Success. DES-3800:4# config ssl cachetimeout timeout Purpose Used to configure the SSL cache timeout.
  • Page 299 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show ssl cachetimeout Parameters Restrictions Example usage: To view the SSL cache timeout on the Switch: DES-3800:4#show ssl cachetimeout Command: show ssl cachetimeout Cache timeout is 600 second(s).
  • Page 300 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To view certificate file information on the Switch: DES-3800:4# show ssl certificate Command: show ssl certificate Loaded with RSA Certificate! DES-3800:4# download certificate_fromTFTP Purpose Syntax Description...

  • Page 301: Jumbo Frame Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Jumbo Frame Commands Certain switches can support jumbo frames (frames larger than the standard Ethernet frame size of 1518 bytes). To transmit frames of up to 9K (and 9004 bytes tagged), the user can increase the maximum transmission unit (MTU) size from the default of 1536 by enabling the Jumbo Frame command.
  • Page 302 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Example usage: To enable the jumbo frame function on the Switch: DES-3800:4#disable jumbo_frame Command: disable jumbo_frame Success. DES-3800:4# show jumbo_frame Purpose Syntax Description Parameters Restrictions Usage Example: To show the jumbo frame status currently configured on the Switch:...

  • Page 303: D-Link Single Ip Management Commands

    SIM group. The Candidate Switch may join the SIM group through an automatic function of the DES- 3828, or by manually configuring it to be a MS of a SIM group. A switch configured as a CaS is not a member of a SIM group and will take on the following characteristics: It is not a CS or MS of another Single IP group.
  • Page 304 After configuring one switch to operate as the CS of a SIM group, additional DES-3828 switches may join the group by either an automatic method or by manually configuring the Switch to be a MS. The CS will then serve as the in band entry point for access to the MS. The CS’s IP address will become the path to all MS’s of the group and the CS’s Administrator’s password, and/or authentication will control access...
  • Page 305 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual enable sim Purpose Syntax Description Parameters Restrictions Example usage: To enable SIM on the Switch: DES-3800:4#enable sim Command: enable sim Success. DES-3800:4# disable sim Purpose Syntax Description Parameters...
  • Page 306 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual show sim Parameters Restrictions Example usage: To show the SIM information in detail: DES-3800:4#show sim Command: show sim SIM Version Firmware Version : 1.00.B16 Device Name group on the Switch, including the following: SIM Version - Displays the current Single IP Management version on the Switch.
  • Page 307 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual MAC Address : 00-10-20-33-45-00 Capabilities : L3 Platform : DES-3828 L3 Switch SIM State : Disabled Role State : Candidate Discovery Interval : 30 sec Holdtime : 100 sec...
  • Page 308 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual *1 00-01-02-03-04-00 2 00-55-55-00-55-00 SIM Group Name : SIM2 ID MAC Address --- ----------------- *1 00-01-02-03-04-00 2 00-55-55-00-55-00 ‘*’ means commander switch. DES-3800:4# Example usage: To view SIM neighbors:...
  • Page 309 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# Login: config sim_group Purpose Syntax Description Parameters Restrictions Example usage: To add a member: DES-3800:4#config sim_group add 2 Command: config sim_group add 2 Please wait for ACK!!! SIM Config Success !!! Success.
  • Page 310 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config sim Switch. Syntax config sim [{[ commander {group_name <groupname 64> | candidate] | dp_interval <sec 30-90> | hold_time <sec 100- 255>]} Description This command is used to configure parameters of switches of the SIM.
  • Page 311 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4# To transfer the CS (commander) to be a CaS (candidate): DES-3800:4# config sim candidate Command: config sim candidate Success. DES-3800:4# To transfer the Switch to be a CS:...
  • Page 312 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual download sim_ms Restrictions Example usage: To download firmware: DES-3800:4# download sim_ms firmware_from_tftp 10.53.13.94 c:/des3828.had all Command: download sim_ms firmware_from_tftp 10.53.13.94 c:/des3828.had all This device is updating firmware. Please wait...
  • Page 313 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual upload sim_ms Syntax Description Parameters Restrictions Example usage: To upload configuration files to a TFTP server: DES-3800:4# upload sim_ms configuration 10.55.47.1 D:\configuration.txt 1 Command: upload sim_ms configuration 10.55.47.1 D:\configuration.txt 1...

  • Page 314: Command History List

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command History List The switch history commands in the Command Line Interface (CLI) are listed (along with the appropriate parameters) in the following table. Command config command_history show command_history Each command is listed, in detail, in the following sections.
  • Page 315 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config account config admin local_enable config arp_aging time config arpentry config authen application CTRL+C ESC q Quit SPACE n Next Page ENTER Next Entry a All Purpose Syntax...
  • Page 316 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config command_history Purpose Syntax Description Parameters Restrictions Example usage To configure the command history: DES-3800:4#config command_history 20 Command: config command_history 20 Success. DES-3800:4# show command_history Purpose Syntax Description...

  • Page 317: Poe

    PSE pinout Alternative A, whereby power is sent out over pins 1,2,3 and 6. DES-3828P works with all D-Link 802.3af capable devices. The Switch also works in PoE mode with all non-802.3af capable D-Link AP, IP Cam and IP phone equipment via DWL-P50.
  • Page 318 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command config poe system config poe ports show poe system show poe ports Each command is listed in detail in the following sections. config poe system Purpose Syntax...
  • Page 319 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual config poe ports Purpose Syntax Description Parameters Restrictions Example usage: To config the the Switch: DES-3800:4#config poe ports 1-3 state enable priority critical power_limit 12000 Command: config poe ports 1-3 state enable priority critical power_limit 12000 Success.
  • Page 320 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#show poe system Command: show poe system PoE System Information --------------------------------------------------- Power Limit Power Consumption Power Remained Power Disconnection Method : deny next port DES-3800:4# show poe ports Purpose Used to display the setting and actual values of the PoE ports.
  • Page 321 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual OFF : Interim state during line detection DES-3800:4#show poe ports <portlist> Command: show poe ports...

  • Page 322: Modify Banner And Prompt Commands

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Modify Banner and Prompt Commands Administrator level users can modify the login banner (greeting message) and command prompt by using the commands described below. Command config greeting_message config command_...
  • Page 323 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Command: config greeting_message Banner Editor ================================================================================ this is the best switch ever ================================================================================ <Function Key> Ctrl+C Quit without save Ctrl+W Save and quit Ctrl+D Ctrl+X Ctrl+L config command prompt...
  • Page 324 DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual DES-3800:4#config command_prompt Geeksrule Command: config command_prompt Geeksrule Success. Geeksrule:4#...

  • Page 325: Technical Specifications

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Technical Specifications Standards IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3z 1000BASE-T (SFP “Mini GBIC”) IEEE 802.1D Spanning Tree IEEE 802.1W Rapid Spanning Tree IEEE 802.1 P/Q VLAN...

  • Page 326: Physical And Environmental

    DES-3800 Series Layer 3 Stackable Fast Ethernet Managed Switch CLI Manual Internal power supply Power Consumption DC fans: Operating Temperature Storage Temperature Humidity Dimensions Weight EMI: Safety: Transmission Method Packet Buffer Packet Filtering / Forwarding Rate MAC Address Learning...

This manual is also suitable for:

Des-3828pDes-3828Des-3828dc

Table of Contents