Diagnostic Tool Connection Procedure; Diagnostic Connector Positions - Kubota V3800-CR-TE4 Diagnosis Manual

V3800-CR-TE4,V3800-CR-TIE4, DM

2. DIAGNOSTIC TOOL CONNECTION PROCEDURE

[1] DIAGNOSTIC CONNECTOR POSITIONS

[2] DIAGNOSTIC TOOL CONNECTION PROCEDURE
IMPORTANT
• At first time usage, it is necessary to do "Communication Setting" with administrator user account.
• Prepare a PC on which the diagnostic software has already been installed.
• When connecting the diagnosis cable, ensure that the key switch on the machine side is OFF.
1. The CAN1 connector (a) for connecting the diagnostic tool is in
the position shown in the figure.
(1) Terminal IG-SW (B-47, B-48)
(2) Terminal CAN1-H (B-51)
(3) Terminal S-GND (B-1, B-2)
(4) Terminal CAN1-L (B-52)
1-S8
COMMON RAIL SYSTEM
(a) CAN1 Connector
[A] M60 Series
[B] M-GX Series
9Y1200192CRS0850US0
9Y1200192CRS0011US0
KiSC issued 05, 2012 A