Kubota V3800-CR-TE4 Diagnosis Manual page 79

V3800-CR-TE4,V3800-CR-TIE4, DM
2. Check the DTC
1. Turn the key switch ON and check the DTC.
Factory
No DTC is output.
specification
DTC presently existing
OK Go to "3. Check the Intake System".
NG Check in accordance with the troubleshooting procedures for each DTC.
Past DTC only
OK Go to "3. Check the Intake System".
NG Reproduce defect by referring to the freeze frame data, etc.
(a) CAN1 Connector
3. Check the Intake System
1. Check in accordance with "6.[1] AIR INTAKE SYSTEM
INSPECTION PROCEDURE". (Refer to page 1-S285)
OK Go to "4. Check the Fuel System".
NG Repair in accordance with "6.[1] AIR INTAKE SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S285)
(1) Air Cleaner
(2) Air Cleaner Indicator
(3) Air Cleaner Switch
4. Check the Fuel System
1. Check in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S287)
OK Go to "5. Check the Final Accelerator Open Position".
NG Repair in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S287)
(1) Fuel Filter
(2) Supply Pump
(3) Water Separator
(4) Fuel Feed Pump
1-S52
COMMON RAIL SYSTEM
9Y1200192CRS0093US0
[A] M60 Series
[B] M-GX Series
9Y1200192CRS0905US0
[A] M60 Series
[B] M-GX Series
9Y1200192CRS0906US0
KiSC issued 05, 2012 A