V3800-CR-TE4,V3800-CR-TIE4, DM
1. DTC Judgment
1. Place the key switch in the OFF position, and attach the
diagnosis tool to the CAN1 connector.
2. Place the key switch in the ON position, check whether the DTC
is output or not.
3. Check the DTC again after starting up the engine with the
coolant temperature over 65 °C (149 °F).
Factory
DTC must not be output.
specification
OK
Normal.
NG
Replace the EGR assembly.
(a) CAN1 Connector
1-S248
COMMON RAIL SYSTEM
9Y1200192CRS0338US0
KiSC issued 05, 2012 A