Kubota V3800-CR-TE4 Diagnosis Manual page 298

V3800-CR-TE4,V3800-CR-TIE4, DM
3. Check the DTC
1. Check the engine noise and vibration after starting up the
engine.
Check whether turbo has abnormality. (sound and externals)
2. Check whether the other DTC is output or not by operating the
engine in the normal condition.
3. If it is OK, restart and operate the engine for 10 minutes with the
engine in the no-load maximum speed status. Check whether
the DTC is output or not.
Factory
No DTC is output.
specification
OK Normal.
NG Replace the ECU
(a) CAN1 Connector
1-S271
COMMON RAIL SYSTEM
9Y1200192CRS0533US0
KiSC issued 05, 2012 A