Kubota V3800-CR-TE4 Diagnosis Manual page 75

V3800-CR-TE4,V3800-CR-TIE4, DM
7. Check the Intake System
1. Check in accordance with "6.[1] AIR INTAKE SYSTEM
INSPECTION PROCEDURE". (Refer to page 1-S285)
OK Go to "8. Check the Fuel System".
NG Repair in accordance with "6.[1] AIR INTAKE SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S285)
(1) Air Cleaner
(2) Air Cleaner Indicator
(3) Air Cleaner Switch
8. Check the Fuel System
1. Check in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S287)
OK Go to "9. Check the Crankshaft Position Sensor".
NG Repair in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S287)
(1) Fuel Filter
(2) Supply Pump
(3) Water Separator
(4) Fuel Feed Pump
9. Check the Crankshaft Position Sensor
1. Refer to DTC P0335 and P0336, and implement checking of the
crankshaft position sensor.
OK Go to "10. Check the Camshaft Position Sensor".
NG Repair and replacement of the crankshaft position sensor-related parts.
(1) Crankshaft Position Sensor
(NE Sensor)
1-S48
COMMON RAIL SYSTEM
[A] M60 Series
[B] M-GX Series
9Y1200192CRS0901US0
[A] M60 Series
[B] M-GX Series
9Y1200192CRS0902US0
9Y1200192CRS0086US0
KiSC issued 05, 2012 A