V3800-CR-TE4,V3800-CR-TIE4, DM
(1) Terminal NE-VCC
(2) Terminal NE
(3) Terminal NE-GND
1. Check the Crankshaft Position Sensor Signals
1. Rotate the engine, and check the "Engine speed active flag"
value on the diagnosis tool data monitor.
Factory
specification
OK
NG
(a) CAN1 Connector
1-S179
(a) Terminal Layout
(b) Crankshaft Position Sensor
(NE Sensor)
Always ON
It should be confirmed two or more times while changing the accelerator.
OK
Normal.
NG
Go to "2. Check the Voltage Between Crankshaft Position
Sensor Terminals".
Go to "2. Check the Voltage Between Crankshaft Position Sensor
Terminals".
COMMON RAIL SYSTEM
(c) NE Sensor Input Circuit
(d) ECU Connector 1
(A: 96 Pin)
9Y1200192CRS0719US0
9Y1200192CRS0307US0
KiSC issued 05, 2012 A