Kubota V3800-CR-TE4 Diagnosis Manual page 256

V3800-CR-TE4,V3800-CR-TIE4, DM
1. DTC Judgment
1. Place the key switch in the OFF position, and attach the
diagnosis tool to the CAN1 connector.
2. Turn the key switch to the ON position, check whether the DTC
(P2131) is output or not.
Factory
No DTC (P2131) is output.
specification
OK Normal.
NG Go to "2. Check the Monitor of the Tractor".
(a) CAN1 Connector
2. Check the Monitor of the Tractor
1. Turn on the key switch and confirm that no defects except those
in the engine occur.
Factory
No defects except that in the engine occur.
specification
OK Possible defects in the ECU for the tractor. Execute the diagnosis
according to the workshop manual for the tractor.
NG Defects in the accelerator sensor signal. Execute the diagnosis
according to the workshop manual for the tractor.
[A] M60 Series
1-S229
COMMON RAIL SYSTEM
9Y1200192CRS0436US0
[B] M-GX Series
9Y1200192CRS0929US0
KiSC issued 05, 2012 A