V3800-CR-TE4,V3800-CR-TIE4, DM
1. Check the Fuel Feed Pump Operation
1. Turn the key switch ON and check that the fuel feed pump is
operating.
Factory
Operates when the key switch is turned ON.
specification
OK
Go to "2. Check the DTC".
NG
Check in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE - 5. Check the Fuel Feed Pump". (Refer to page 1-S291)
(1) Fuel Feed Pump
2. Check the DTC
1. Turn the key switch ON and check the DTC.
Factory
No DTC is output.
specification
Communication error
OK
Go to "3. Check the Starting Assist Device".
NG
Go to "6. Check the ECU Power Supply and Grounding".
DTC presently existing
OK
Go to "3. Check the Starting Assist Device".
NG
Check in accordance with the troubleshooting procedures for each DTC.
Past DTC only
OK
Go to "3. Check the Starting Assist Device".
NG
Reproduce defect by referring to the freeze frame data, etc.
(a) CAN1 Connector
1-S24
COMMON RAIL SYSTEM
[A] M60 Series
[B] M-GX Series
9Y1200192CRS0872US0
9Y1200192CRS0028US0
KiSC issued 05, 2012 A