Check The Final Accelerator Open Position - Kubota V3800-CR-TE4 Diagnosis Manual

V3800-CR-TE4,V3800-CR-TIE4, DM
5. Check the Fuel System
1. Check in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S287)
OK Go to "6. Check the Final Accelerator Open Position".
NG Repair in accordance with "6.[2] FUEL SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S287)
(1) Fuel Filter
(2) Supply Pump
(3) Water Separator
(4) Fuel Feed Pump

6. Check the Final Accelerator Open Position

1. Select "Final accelerator open position" using the diagnosis tool
data monitor function.
2. While operating the accelerator lever, accelerator pedal, and
setting dial for upper-limit of engine rotation, confirm that "Final
accelerator open position" is interlocked with them.
Variable corresponding to the operation between the
Factory
minimum of 0 % and the maximum of 100 % without delay in
specification
response.
OK Go to "7. Check the Crankshaft Position Sensor".
NG Referring to the workshop manual of the tractor, check and repair the
items related to the accelerator sensor and accelerator CAN outputs of
the tractor.
*In the case of CAN communication error, designate the fixed final open
position of the accelerator at the engine side.
(Refer to the page of the system action of the DTC list.)
(1) Setting Dial for Upper-limit of
Engine Rotation
7. Check the Crankshaft Position Sensor
1. Refer to DTC P0335 and P0336, and implement checking of the
crankshaft position sensor.
OK Go to "8. Check the Camshaft Position Sensor".
NG Repair and replacement of the crankshaft position sensor-related parts.
(1) Crankshaft Position Sensor
(NE Sensor)
1-S64
COMMON RAIL SYSTEM
[A] M60 Series
[B] M-GX Series
9Y1200192CRS0889US0
(2) Accelerator Lever
9Y1200186CRS0144US0
9Y1200192CRS0054US0
KiSC issued 05, 2012 A