Kubota V3800-CR-TE4 Diagnosis Manual page 80

V3800-CR-TE4,V3800-CR-TIE4, DM
5. Check the Final Accelerator Open Position
1. Select "Final accelerator open position" using the diagnosis tool
data monitor function.
2. While operating the accelerator lever, accelerator pedal, and
setting dial for upper-limit of engine rotation, confirm that "Final
accelerator open position" is interlocked with them.
Variable corresponding to the operation between the
Factory
minimum of 0 % and the maximum of 100 % without delay in
specification
response.
OK Go to "6. Check the Crankshaft Position Sensor".
NG Referring to the workshop manual of the tractor, check and repair the
items related to the accelerator sensor and accelerator CAN outputs of
the tractor.
*In the case of CAN communication error, designate the fixed final open
position of the accelerator at the engine side.
(Refer to the page of the system action of the DTC list.)
(1) Setting Dial for Upper-limit of
Engine Rotation
6. Check the Crankshaft Position Sensor
1. Refer to DTC P0335 and P0336, and implement checking of the
crankshaft position sensor.
OK Go to "7. Check the Camshaft Position Sensor".
NG Repair and replacement of the crankshaft position sensor-related parts.
(1) Crankshaft Position Sensor
(NE Sensor)
7. Check the Camshaft Position Sensor
1. Refer to DTC P0340 and P0341, and implement checking of the
camshaft position sensor.
OK Go to "8. Check the EGR Valve".
NG Repair and replacement of camshaft position sensor-related parts.
(1) Camshaft Position Sensor
(G Sensor)
1-S53
COMMON RAIL SYSTEM
(2) Accelerator Lever
9Y1200186CRS0160US0
9Y1200192CRS0042US0
9Y1200192CRS0098US0
KiSC issued 05, 2012 A