V3800-CR-TE4,V3800-CR-TIE4, DM
1. Check the DTC
1. Place the key switch in the OFF position, attach the diagnosis
tool to the CAN1 connector, and return the key switch to the ON
position again.
2. Clear the DTC, and check whether the same DTC (P0605 or
P0606) is output again or not.
Factory
No DTC is output.
specification
OK
An electromagnetic interference (EMI) may have caused the temporary
malfunction. There is no problem if the system has recovered.
NG
Faulty Engine ECU → Replace.
(a) CAN1 Connector
1-S206
COMMON RAIL SYSTEM
9Y1200192CRS0371US0
KiSC issued 05, 2012 A