Kubota V3800-CR-TE4 Diagnosis Manual page 90

V3800-CR-TE4,V3800-CR-TIE4, DM
2. Check the DTC
1. Turn the key switch ON and check the DTC.
Factory
No DTC is output.
specification
DTC presently existing
OK Go to "3. Check the idle condition".
NG Check in accordance with the troubleshooting procedures for each DTC.
Past DTC only
OK Go to "3. Check the idle condition".
NG Reproduce defect by referring to the freeze frame data, etc.
(a) CAN1 Connector
3. Check the Idle Condition
1. Check if idling is normal.
Factory
Stable at specified speed.
specification
OK Go to "4. Check the Intake System".
NG Refer to "(4) Idle Failure", and implement checking and repair. (Refer to
page 1-S33)
[A] M60 Series
4. Check the Intake System
1. Check in accordance with "6.[1] AIR INTAKE SYSTEM
INSPECTION PROCEDURE". (Refer to page 1-S285)
OK Go to "5. Check the Fuel System".
NG Repair in accordance with "6.[1] AIR INTAKE SYSTEM INSPECTION
PROCEDURE". (Refer to page 1-S285)
(1) Air Cleaner
(2) Air Cleaner Indicator
(3) Air Cleaner Switch
1-S63
COMMON RAIL SYSTEM
9Y1200192CRS0118US0
[B] M-GX Series
9Y1200192CRS0918US0
[A] M60 Series
[B] M-GX Series
9Y1200192CRS0880US0
KiSC issued 05, 2012 A