V3800-CR-TE4,V3800-CR-TIE4, DM
6. Check for a Fuel Leakage
1. Increase the rail pressure by operating the accelerator pedal or
accelerator lever, and check for a fuel leakage.
Factory
No fuel leaks.
specification
OK
Go to "7. Check the DTC Again".
NG
Locate the leakage position and repair it.
(a) CAN1 Connector
7. Check the DTC Again
1. Clear the past malfunction data, and make sure that the same
DTC is output again in the reproduction test.
Factory
Normal (No DTC is output.)
specification
NOTE
• Use all of the available information and try to reproduce the
problem by operating the accelerator pedal in different
ways and by changing the environmental conditions.
OK
Normal.
NG
Go to "8. Check the SCV-related Data".
(a) CAN1 Connector
1-S148
COMMON RAIL SYSTEM
9Y1200192CRS0234US0
9Y1200192CRS0235US0
KiSC issued 05, 2012 A