Kubota V3800-CR-TE4 Diagnosis Manual page 219

V3800-CR-TE4,V3800-CR-TIE4, DM
1. DTC Judgment
1. Place the key switch in the OFF position, and attach the
diagnosis tool to the CAN1 connector.
2. Place the key switch in the ON position, check whether the DTC
is output or not.
3. Check the DTC again after starting up the engine with the
coolant temperature over 65 °C (149 °F).
Factory
DTC must not be output.
specification
OK Normal.
NG Replace the EGR assembly.
(a) CAN1 Connector
1-S192
COMMON RAIL SYSTEM
9Y1200192CRS0338US0
KiSC issued 05, 2012 A