Excessive Pm5 (Dtc P3008 / 3701-0) - Kubota V3800-CR-TE4 Diagnosis Manual

V3800-CR-TE4,V3800-CR-TIE4, DM

(51) Excessive PM5 (DTC P3008 / 3701-0)

Behaviour during malfunction:
• Insufficient output
Detection item:
• PM accumulation level5
DTC set preconditions:
• Battery voltage is normal
DTC set parameter:
• PM accumulation more than trigger level (36000 mg)
Engine warning light:
• ON
System action:
• Output limitation: Approximately 50 % of normal condition
Recovery from error:
• Key switch turn OFF
1. Replace of DPF
1. Replace the DPF.
NOTE
• Followings are potential causes.
– A manual regeneration has not been carried out.
(1) DPF Outlet Body
(2) DPF Filter Comp
(3) DPF Collar
(4) DOC Catalyst
1-S269
COMMON RAIL SYSTEM
9Y1200192CRS0825US0
(5) DPF Gasket
(6) DPF Gasket
(7) DPF Gasket
9Y1200192CRS0529US0
KiSC issued 05, 2012 A