V3800-CR-TE4,V3800-CR-TIE4, DM
(50) Excessive PM4 (DTC P3007 / 3701-16)
Behaviour during malfunction:
• Insufficient output
Detection item:
• PM accumulation level4
DTC set preconditions:
• Battery voltage is normal
DTC set parameter:
• PM accumulation more than trigger level (31000 mg)
Engine warning light:
• ON
System action:
• Output limitation: Approximately 50 % of normal condition
Recovery from error:
• Diagnostic counter = zero
1. DPF Manual Regeneration Reguest Function
1. Perform the diagnosis tool active test ("DPF Manual
Regeneration").
NOTE
• Followings are potential causes.
–
A manual regeneration has not been carried out. Start
DPF manual regeneration immediately when the
manual regeneration warning light comes ON.
(a) CAN1 Connector
1-S268
COMMON RAIL SYSTEM
9Y1200192CRS0824US0
9Y1200192CRS0527US0
KiSC issued 05, 2012 A