FujiFilm CR-IR 357 Service Manual page 8

3.2 Unloading
CAUTIONS
- When unloading the machine, two persons should always cooperate to do so.
- Before unloading the machine, secure a proper machine transfer route.
- Unload the machine on a flat space as close to the installation space as possible. If
there are many steps or bumps in the machine transfer route, load may be applied to
casters, causing damage.
- Secure a necessary space for unloading, before unloading the machine together with
the carrier pallet from the load-carrying platform of the truck.
014-204-01E
11.10.2005 FM4750
1.
Unload the machine together with the carrier pallet from the load-carrying
platform of the truck.
2.
Cut the polypropylene (PP) band, and remove the slope.
CR-IR 357 Service Manual
IN-7
IN-7