FujiFilm CR-IR 357 Service Manual page 70

5.1 Fixing the Supporter to the Floor
1.
Put the assembled supporter on a position where it is to be fixed. While holding
the supporter not to shift, mark with a pen or the like the positions to be bored
where the anchor nuts are to be embedded.
<Reference value>
014-204-01E
11.10.2005 FM4750
2.
Once move the supporter. Strike the center punch at the center of the marked
position to easily drill a hole.
CR-IR 357 Service Manual
Appx_IN-26
Appx_IN-26