FujiFilm CR-IR 357 Service Manual page 28

3.
Press the button 11 times, and press the
 NOTE 
Specify the IP address of the CR Console.
4.
Press the button once to select "OK". Then press the [Confirm] button.
→ In 1 to 2 seconds after the [Confirm] button is pressed, an alarm beeps. The specified
address becomes effective, and the menu selection window restores.
014-204-01E
11.10.2005 FM4750
button once.
5.
Confirm the network specifications of the user's site, and set the following
addresses when needed.
 NOTE 
Set the addresses by performing the individual setup procedures set forth in the
Maintenance Utility volume.
- For SubnetMask setup
{MU:3.3_SubnetMask}
- For Default Gateway setup
{MU:3.5_Default Gateway}
- For Secure Host setup
{MU:3.6_Secure Host}
- For Secure Net setup
{MU:3.7_Secure Net}
CR-IR 357 Service Manual
IN-27
IN-27