FujiFilm CR-IR 357 Service Manual page 31

8.6 Installing RU Software
REFERENCE
This section describes the procedures, by way of example, where settings are made as
follows:
INSTALL VERSION: 1.1
LANGUAGE: English
BRAND TYPE: U.S.A (FMSU)
SCREEN TYPE: HOSPITAL
LINAC CASSETTE: NOT USE
1.
Click on [START].
2.
Click on [NEW].
3.
Enter Install "RU NAME" and "RU IP ADDR".
 NOTE 
If the "Reader Unit IP Address" setting was changed from the RU operation panel before
RU software installation, enter the changed address.
014-204-01E
11.10.2005 FM4750
4.
Click on [PING].
5.
Check the result of PING, and click on
 [GOOD indication]
If the following message appears, the result is normal.
| Ping statistics for 172.16.1.11:
| Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
 [NO GOOD indication]
Other than above is all abnormal. (The selected IP address of the RU is displayed.)
 NOTE 
In the case of "NO GOOD" indication
{Troubleshooting}
CR-IR 357 Service Manual
IN-30
to close the window.
|
|
IN-30