FujiFilm CR-IR 357 Service Manual page 25

8. Installing RU Software
Start up the Machine Maintenance Utility of the RU and set the "RU IP Address" and "FTP
Server IP Address."
The procedure described here assumes that the following addresses are to be set:
RU IP address: 172.16.1.11
FTP server IP address: 172.16.1.21
8.1 Starting the Machine Maintenance Utility
1.
Turn ON the power of the CR Console.
2.
Turn ON the circuit breaker of the RU.
014-204-01E
11.10.2005 FM4750
3.
Start up the Machine Maintenance Utility of the RU.
Turn ON the RU power while pressing the first and third buttons from the left on
the operation panel. Keep pressing the first and third buttons from the left until the
"Maintenance Utility" window appears on the operation panel.
 NOTE 
Be sure to keep pressing the first and third buttons from the left until the "Maintenance
Utility" window appears on the operation panel. If the "Maintenance Utility" window
does not appear and the RU starts to boot up, once turn OFF the RU power and repeat
from the procedure 1.
CR-IR 357 Service Manual
IN-24
IN-24