Installation Procedures; Connecting The Cables - FujiFilm CR-IR 357 Service Manual

4.

Installation Procedures

4.1 Removing the Transportation Protective Member
1.
Remove the tapes.
2.
Remove the protective member.
014-204-01E
11.10.2005 FM4750
5.

Connecting the Cables

5.1 Connecting the Power Cable and Checking Resistance
Value
WARNINGS
- Before measuring the resistance value, make sure that the power plug is unplugged
from the outlet.
- If the machine is to be installed in the patient environment, see "APPENDIX 1.
ADDITIONAL PROTECTIVE GROUNDING."
{IN: Appendix 1_ADDITIONAL PROTECTIVE GROUNDING}
1.
Connect the power cable to the machine.
2.
Place the breaker switch in the ON position.
CR-IR 357 Service Manual
IN-19
IN-19