FujiFilm CR-IR 357 Service Manual page 81

3.
Start up the Machine Maintenance Utility of the RU.
Turn ON the RU power while pressing the first and third buttons from the left on
the operation panel. Keep pressing the first and third buttons from the left until the
"Maintenance Utility" window appears on the operation panel.
 NOTE 
Be sure to keep pressing the first and third buttons from the left until the "Maintenance
Utility" window appears on the operation panel. If the "Maintenance Utility" window
does not appear and the RU starts to boot up, once turn OFF the RU power and repeat
from the procedure 1.
014-204-01E
11.10.2005 FM4750
4.
Select [Run...] from the Start menu of Windows. When the dialog opens, type ["C:\
Program Files\FujiFilm\FCR\TOOL\RuPcTool\RuPcTool.exe"] and click on the [OK]
button.
CR-IR 357 Service Manual
Appx_IN-37
Appx_IN-37