FujiFilm CR-IR 357 Service Manual page 15

15.
Place the slope over the step of the carrier pallet.
 NOTES 
- Place the slope with the surface having the label applied facing upward. Since the
step of the slope serves as a guide for casters, if a wrong face is placed, a difference
in levels will occur between the carrier pallet and the slope, and in addition, the casters
might come off from the slope when the machine is unloaded.
- Place the slope with the side with holes toward the carrier pallet.
014-204-01E
11.10.2005 FM4750
16.
Pass the PP bands through the holes of the slope.
CR-IR 357 Service Manual
IN-14
IN-14