FujiFilm CR-IR 357 Service Manual page 34

16.
Confirm the installation precautions.
CAUTION
While the flash ROM is being written into, never turn OFF the RU or CR Console. If
you turn OFF the power, the program stored in the memory becomes damaged and
cannot restart.
17.
Click on [SET].
When you click on [SET], the installation screen appears on the CR Console display.
While the flash ROM is being written into, the RU's LED glows.
 NOTE 
Do not close the installation screen until the flash ROM write process is completed.
If you inadvertently close the installation screen, return to step 7 and perform the
installation procedure again. The flash ROM write process takes about 8 minutes.
014-204-01E
11.10.2005 FM4750
18.
Verify that the flash ROM write process is completed, and then press the [Enter]
key twice.
19.
Click on [OK].
CR-IR 357 Service Manual
IN-33
IN-33