FujiFilm CR-IR 357 Service Manual page 65

4. Securing the Machine
WARNING
Be sure to fix the supporter to the floor or to the wall to secure the machine according
to "Appendix 3-5 Securing the Supporter" in a site where a long cassette is used.
{IN:Appendix 3-5_Securing the Supporter}
014-204-01E
11.10.2005 FM4750
1.
Adjust the height of the adjustable foot so that a distance from the upper surface
of the nut of the adjustable foot to the bottom of the machine is approx. 5 mm, in
order to mount the bracket on the machine. After the adjustment, check to make
sure that there is no aperture between the two nuts of the adjustable foot.
 NOTE 
Check to make sure that there is no aperture between the two nuts of the adjustable
foot. If there is an aperture between the nuts, the machine retaining bracket cannot be
fixed properly.
CR-IR 357 Service Manual
Appx_IN-21
Appx_IN-21