FujiFilm CR-IR 357 Service Manual page 83

2. Registering the RU (Procedures on the CL2)
1.
Start the Service Utility.
{FCR XG-1/CR CL Service Manual/Maintenance Utility (MU)/1. Starting and
Exiting the Service Utility}
2.
Click on [Setup Configuration Item].
3.
Click on [ALL OTHER NODES] of [NETWORK CONFIG].
4.
Click on .
→ The "New Node" dialog box appears.
014-204-01E
11.10.2005 FM4750
5.
Enter the host name (ru0) of the RU in
(172.16.1.11) in
6.
Select in the "Add Node" field, and click on
→ The "FRUP Setup" screen appears.
7.
Check in the "Attribute" field (
8.
Type "ru0" in
REFERENCE
The name should not necessarily be the same as the host name.
9.
Click on .
→ Registering the network information is now completed.
CR-IR 357 Service Manual
Appx_IN-39
and its IP address
.
.
→ ).
.
Appx_IN-39