FujiFilm CR-IR 357 Service Manual page 13

11.
Cut the corners of the plastic covers which cover the two machine retainers
on the right- and left-hand on the front of the machine by a cutter, and remove
the front bolt of the two bolts retaining the machine retainer on the front of the
machine.
CAUTION
Do not remove all of the four bolts which retain the machine retainers on the front of
the machine. If removed, the machine is movable, and might drop from the carrier
pallet.
014-204-01E
11.10.2005 FM4750
12.
Loosen the bolts which retain the two right and left machine retainers on the
front of the machine, and then once loosen the adjustable feet on the front of the
machine.
REFERENCE
In loosening the nut of the adjustable foot, use of a 13-mm spanner is recommended to
improve workability.
CR-IR 357 Service Manual
IN-12
IN-12