FujiFilm CR-IR 357 Service Manual page 77

3.
Insert the front bracket from the front of the machine between the nut of the
adjustable foot and the bottom of the machine. While pushing the bracket against
the machine, fasten the nut of the adjustable foot for retaining.
 NOTES 
- Be sure to fasten the nut while pushing the bracket against the machine. If the bracket
is pushed insufficiently, the machine may not be able to be properly retained.
- When fastening the nut of the adjustable foot, exercise care not to cause an aperture
between the two nuts. The bracket might not be able to be properly retained.
014-204-01E
11.10.2005 FM4750
4.
Move the machine into the supporter.
CAUTION
When pushing the machine into the supporter or pulling the machine out of the
supporter, exercise care so that your fingers and other parts of your body are not
caught between the supporter and machine.
CR-IR 357 Service Manual
Appx_IN-33
Appx_IN-33