5.
Cut the lower part of the plastic cover which protects the machine. Remove the
upper part of the plastic cover.
NOTE
When cutting the plastic cover, cut below the bottom of the machine. Do not damage
the machine with a sharp instrument.
014-204-01E
11.10.2005 FM4750
6.
Cut the corners of the plastic cover which cover two right and left machine
retainers on the rear of the machine. Then remove the bolts which retain the
machine retainers on the rear of the machine.
REFERENCE
In removing the bolts, use of a 17-mm spanner is recommended to improve workability.
CR-IR 357 Service Manual
IN-9
IN-9