INSTALLATION GUIDE > Printer Assembly > Check and cleaning the LM guide
Issue
Model
JV300
4.6 Check and cleaning the LM guide
Work procedures
LM guide
© 2014 MIMAKI ENGINEERING CO.,LTD.
Revised 2014.05.08 F/W ver. 1.00 Remark
2014.04.11
1. Using manual operation, move the carriage back and forth
Carriage
2. Visually check the LM guide left/right ends and the LM guide
along its full travel distance several times.
block unit for formation of grease droplets, and wipe away any
grease droplets.
The grease is applied for the purposes of
corrosion prevention and lubrication, so do not
remove any more than necessary, and do not use
alcohol or similar.
Rev.
1.1
1
2
3
4
5
6
7
4.6
R.1.1
P.16