Creating Dial Plans—Examples; Source Id - ADTRAN Atlas 550 User Manual

Chapter 11. Dial Plan
D64, D56,
A , S
UDIO PEECH
S MSD
TRIP
S ID
OURCE
CREATING DIAL PLANS—EXAMPLES
11-26
These options reflect the network provisions for this SPID. If the BRI was
purchased with different services provisioned for the SPIDs, then the call
must match the services supported.
Write security: 3; Read security: 5
Strips a selected quantity (choose from N
icant Digits (MSD) of a dialed number prior to being forwarded out of the
port.
E :
XAMPLE
A network port could be set to accept all calls beginning with 9 (9$), and
then with S MSD set to 1, all digits would be sent toward the network
TRIP
except the leading 9.
S MSD does not affect C
TRIP
(including the MSDs that are subsequently stripped) are used as
accept criterion.
Write security: 3; Read security: 5
Simplifies the creation of a D
switching calls to a certain endpoint is a function of which endpoint origi-
nated the call.
• Default value = 0. The default ID for all endpoints is 0 and for all accept
numbers is 0. With default values, all calls are routed based only on the
dialed number.
• Multiple endpoints can have the same S
• When creating the C
dialed number or range of dialed numbers to accept.
E :
XAMPLE
An application requires that all calls that originate from Port 1 of the
ATLAS 550 in Slot 1 be switched to Port 2 of that same module. Assign a
unique Source ID (e.g. 7) to Port 1 of the module, and then configure Port 2
to only accept calls from that unique Source ID (7).
The ATLAS 550 D P
IAL LAN
tions. This menu defines to the ATLAS 550 the phone numbers and features
associated with dual-tone-multifrequency (DTMF) dialing, Primary Rate
ISDN (PRI), and Basic Rate ISDN (BRI). To operate as a switch, the ATLAS
550 must be able to terminate network connections (Network terminations)
and emulate the network onto other termination equipment (User termina-
tions).
ATLAS 550 User Manual
, 1, 2, and 3) of the Most Signif-
ONE
A
ALL CCEPT
P in applications where the criterion for
IAL LAN
OURCE
A list, specify a S
ALL CCEPT
acts as the numbering plan for switched connec-
criteria. All of the digits
ID.
ID(s) as well as a
OURCE
61200305L1-1