Subnet Mask; Begin Firmware Update; Update Status; Transfer Method - ADTRAN Atlas 550 User Manual

Chapter 6. System Control Terminal Menus
B
EGIN
F
IRMWARE
U
PDATE
U S
PDATE TATUS
C T
ONFIG RANSFER
T
RANSFER
M
ETHOD
TFTP S
ERVER
IP A
DDRESS
TFTP S
ERVER
F
ILENAME
6-20
Write security: 1; Read security: 5
Begins updating the firmware for the selected modules. To start this action,
enter to begin or enter
Y
the update has begun. For XMODEM updates, cancel the process via the
terminal emulation software (consult your documentation for information
on how to do this). For TFTP updates, you can cancel the process by select-
ing C U from this field.
ANCEL PDATE
Read security: 5
Displays the status of the current firmware update. These fields are identi-
cal to those defined earlier in Current Update Status.
Write security: 3; Read security: 5
Used only with TFTP transfers. Sends a file containing the ATLAS 550 con-
figuration to a file on a TFTP Server using the TFTP protocol through the
Ethernet port. C T
ONFIG
ration as a backup file, so you can use the same configuration with multiple
ATLAS 550 units. In addition, C
tion file from a TFTP Server.
To support these transfers, ADTRAN delivers a TFTP program with
ATLAS 550 called TFTP Server. You can configure any PC running Microsoft
Windows with this software, and store a configuration file. See TFTP Server
Utility on page 14-10 for details on how to use TFTP Server.
Before using C
valid IP address, subnet mask, and default gateway (if required),
and should be connected to an Ethernet network.
Only one configuration transfer session (upload or download) can be active
at a time. The TCP/IP parameters are not saved or overwritten as part of an
ATLAS 550 unit's transferred configuration; this way, identical configura-
tions can be sent to multiple units.
Write security: 3; Read security: 5
Displays the method used to transfer the configuration file to or from a
server. Currently, you must use TFTP.
Write security: 3; Read security: 5
Specifies the IP address of the TFTP Server. Get this number from your sys-
tem administrator.
Write security: 3; Read security: 5
Defines the name of the configuration file that you transfer to or retrieve
from the TFTP Server. The default name is
this name.
ATLAS 550 User Manual
to cancel. You can also cancel the operation after
N
also lets you save the ATLAS 550 configu-
RANSFER
T
ONFIG RANSFER
T , the ATLAS 550 should have a
ONFIG RANSFER
Atlas550.cfg
can retrieve a configura-
, but you can edit
61200305L1-1