ADTRAN Atlas 550 User Manual page 139

Configuring the Ports for Example 2
Defining the Connections for Example 2
61200305L1-1
Complete the steps outlined in the following Step/Action table to configure
the various ports to match the framing parameters of the T1 line provided
by the telco. (Also see Table 10-2.)
Instructions for Configuring the Ports
Step
1 Navigate to M
ODULES
2 Select N 1 (a T1/PRI network interface).
TW
Set the line framing parameters by selecting the corresponding
3
M / C
ENU ONFIGURATION
Navigate to P
RT
4
for use with additional ports.
Navigate back to N
5 C
ONFIGURATION
by pressing . Press
P
Assign a T1/PRI card to Slot 1. Paste the information copied in step
3 by moving to the corresponding M
6
and pressing . Press
P
page 10-9).
7 Assign Dual Nx 56/64 cards (V35Nx-2) to Slots 2 and 3.
Figure 10-6. T1/PRI Configuration Menu for Example 2
Define the connections by completing the following Step/Action tables.
Make the data connections first and then make the voice connections.
Refer to Table 10-2 on page 10-8 and Figure 10-7 as you define the connec-
tions.
ATLAS 550 User Manual
Action
.
/ F / ESF.
RAME
and press to copy this configuration information
C
2 and move to its corresponding M
TW
/ P . Paste the information copied in step 3 here
RT
to confirm paste.
Y
ENU
to confirm paste (see Figure 10-6 on
Y
Chapter 10. Dedicated Maps
/
ENU
/ C / P
ONFIGURATION RT
10-9