Figure 11-9. Call Routing Table For Routing Using Incoming Number - ADTRAN Atlas 550 User Manual

Chapter 11. Dial Plan
11-30
R T
ANDOMIZE IMER
Write security: 3; Read security: 5
Enables/disables random delay added to the redial timer to avoid glare.
R C
ETRY OUNT
Write security: 3; Read security: 5
Defines the number of redials to attempt.
O C ID
UTGOING ALLER
Write security: 3; Read security: 5
Defines the presentation of the calling party number for this endpoint.
S ID
OURCE
Write security: 3; Read security: 5
Used to simplify the creation of a D
rion for switching calls to a certain endpoint is a function of which endpoint
originated the call. For further details, see Source ID on page 11-14.
R I C
OUTE NCOMING ALL
Write security: 3; Read security: 5
Used to define the method which incoming calls are associated to the
packet endpoints. This item can have three options:
U I N
SING NCOMING UM
Endpoint selection based on the incoming number.
U C P
SING ALLING ARTY
Selection based on the Call ID as presented by the calling party. If this
option is selected, the C
the interface configuration. This number allows you to configure the
calling part number used to select this packet endpoint.
C R T
ALL OUTING ABLE
Read security: 5
This table is only visible if G
format changes, based on the selected routing option. See Figure 11-9,
below and Figure 11-10 on page 31. For each case, C
O #, C ID, and S
UTDIAL ALLER

Figure 11-9. Call Routing Table for Routing Using Incoming Number

ATLAS 550 User Manual
in applications where the crite-
P
IAL LAN
N
UM
P N field is made available to
ALL ARTY UMBER
is selected in the P
ROUP
ID.
OURCE
/PEP field. The table
RT
P contain
ALL ARAMS
61200305L1-1