Session; Connect; Host Name; Port - ADTRAN Atlas 550 User Manual

Chapter 14. ADTRAN Utilities
S
ESSION
C
ONNECT
H N
OST AME
P
ORT
E E
DIT NTRY
A N
DD EW
D
ELETE
C
ONNECT
14-6
Click on S to open the Telnet session.
ESSION
Opens dialog box for
setting H and
N
OST AME
P parameters for a
ORT
Telnet session. Also lets
you E , A
E
DIT NTRY DD
N entry, and D
EW ELETE
stored entries. When the parameters are set, click C
nection. Click C to end the session.
ANCEL
Accepts and stores host names. You may either enter a name, an IP address,
or a domain name directly from this field. Click on the drop-down arrow to
display a complete list of previously stored host names.
Provides several port options. You may enter port numbers directly into this
field to connect to non-standard ports or select the drop-down combo-box to
display the following options:
Establishes a Telnet session
T
ELNET
E Provides a loopback for troubleshooting
CHO
D Bit bucket; discards data
ISCARD
D Returns the time
AYTIME
C Displays as a unique character stream; used for self-tests
HARGEN
Changes either the unit name or
the IP address of each host. Press
either or a
Tab, Return, period (.
after each number in the IP ad-
dress to move to the next field. If
you press or while the
Return (.)
cursor is located in each IP field,
that field entry is deleted.
Prompts you for the same information as the E
host. When enabled, the U
ers to request D
L
OMAIN OOK
specifying an IP address. The name then appears in the H
Removes a host name from the list; simply select the host name you want to
remove, and, at the prompt, click D
Establishes the Telnet session.
ATLAS 550 User Manual
)
E
DIT
DNS (Domain Name Server) feature allows us-
SE
via a DNS server on the network, rather than
U
P
.
ELETE
to make the con-
ONNECT
dialog box for new
NTRY
N field.
OST AME
61200305L1-1